Examples of 'lock should' in a sentence
Meaning of "lock should"
lock should - This phrase may suggest an instruction or recommendation regarding the securing or fastening of a lock for proper safety or protection
How to use "lock should" in a sentence
Basic
Advanced
lock should
The lock should not be greased or oiled.
We recommend therefore that the new model lock should be fitted.
The lock should be easy to open and easy to close.
When replacing locks the new lock should be identical to the old one.
A lock should use strong metal and be as thick as possible where possible.
Door hinges and door lock should be lubricated as needed.
The lock should not be accessible from outside without the use of a key.
Door hinges and door lock should be lubricated when needed.
To effectively prevent unauthorized key duplication, a restricted key lock should be used.
The extra lock should also maintain the electrical connection.
The employee responsible for installing the lock should also be responsible for its removal.
The neutral lock should be used to lock the direction selector in position.
Therefore, for asking whether a lock should be cancelled.
The power door lock should retract before the door begins to move.
Nonetheless, safety is always a priority that lock should be rekeyed as well.
See also
The key of the lock should be changed every two days.
Then again, problems may be discovered that indicate that a lock should be replaced.
The magnetic lock should always be installed on the secure side of the door.
Once the key pieces have been extracted, the door lock should be examined.
Apply pressure and the lock should automatically turn to open the door.
These movement-sensitive devices can awaken you if a door lock should happen to fail.
The latch or lock should be out of the child 's reach.
Push your weight against the door -- the lock should give.
This is why I think caps lock should be BANNED on all computers.
Each lock should only have one key ( no master keys are allowed ).
Of course, the keyboard and the lock should not be physically together.
The lock should be in the ‘ locked ' position.
If a door fails to open, the lock should be the first thing you inspect.
Lock should not grip kingpin and the tool should rotate freely Figure 42.
In particular, the dead-bolt of the lock should reliably keep its terminal positions.
The automatic lock should prevent the belt from unrolling from the retractor ( 2 ).
To use the Guest mode, the pattern lock should be set in advance.
The nut lock should have a locking force of at least 1.5 Nm.
In such a case, the luer lock should comply with ISO standards.
Also, a closed lock should appear in the address bar.
If you do, the lock should give a bit.
Then, the lock should be lubricated.
In addition, the bathroom lock should also be waterproof, anti-rust function.
After use, the Trigger Lock should be set to ‘ locked ' to prevent accidental operation.
You'll also be interested in:
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
