Examples of 'locking knobs' in a sentence
Meaning of "locking knobs"
Refers to knobs or handles that can be turned in order to lock or secure something, such as a door or a drawer. These knobs are used to provide security and prevent unauthorized access
How to use "locking knobs" in a sentence
Basic
Advanced
locking knobs
Then tighten the locking knobs again.
Locking knobs for front vice.
Lock the table locking knobs tightly.
Locking knobs for top vice.
Ensure that both locking knobs are sufficiently.
Repeat with the other three locking knobs.
Also check the locking knobs of the doors.
Handle height can be changed by loosening and tightening locking knobs.
The locking knobs in the doors drop down.
Replace the two locking knobs.
Tighten the locking knobs to secure the accessory tray in place.
Open the upper and lower doors by turning the door locking knobs.
Make sure all locking knobs and clamp handles.
Secure the tool mount unit to the beam by turning the locking knobs until snug.
Retighten the table locking knobs before machine operation.
See also
Having set the tripod always check if all clamping levers and locking knobs are fastened.
Make sure all locking knobs and clamp handles are tight before.
Fold the stand together and let the locking knobs A engage.
Use locking knobs for handlebar adjustment to set most comfortable working height.
Lubricate the table bracket and locking knobs if they become difficult to use.
Adjusting to the proper height, then fix the lower handle by the locking knobs.
Twist the locking knobs to hold the theodolite in position on the exact point.
Loosen the three locking knobs KK.
Make sure all locking knobs and clamp handles are tight before starting any operation.
Loosen the lower handlebar locking knobs 1.
The 2 table locking knobs behind the fence must be loosened.
The cap connectors are formed by resilient locking knobs ( not shown ).
Back out the locking knobs which fixed the lower handle, refer to Fig . 4A.
Piece support 1 so that the workpiece rests level . - Retighten the locking knobs again.
Turn the locking knobs towards the unlock position. fig.2.
The assembly is held by locking knobs 70.
Tighten the locking knobs ( KK ), starting with the rearmost two.
If the workpieces are wider than 280 mm, remove the centre locking knobs.
You'll also be interested in:
Examples of using Locking
Show more
I am not locking the dog in the kitchen
Cylinder locks with custom locking system
A sturdy locking mechanism secures the displays
Examples of using Knobs
Show more
Turn knobs counterclockwise to light main burners
To avoid damage to knobs or flange area around
Knobs are always getting racked in the showers
