Examples of 'loop handle' in a sentence
Meaning of "loop handle"
This phrase is used to refer to a part of an object or device that is designed to be held or operated in a circular or loop-like manner. It describes a handle or grip that has a rounded shape, typically allowing comfortable and secure holding
How to use "loop handle" in a sentence
Basic
Advanced
loop handle
Adjusting loop handle to most comfortable position.
Barrier bar must be mounted on loop handle.
There is a small loop handle on the shoulder.
Loop handle with barrier bar.
For machines with loop handle.
Clip the loop handle onto the shaft.
Convertible arm cord loop handle.
The loop handle comes in two different versions.
Always be sure that the loop handle is installed.
Loop handle brown kraft paper shopping bags.
Be sure to attach the loop handle before starting work.
The loop handle is not properly attached to the main pipe.
Always install the loop handle or the side grip.
Continue to guide the motor scythe via the loop handle.
Assemble loop handle and bracket to shaft tube assembly.
See also
Loosen the screws and take the loop handle off.
Turn the loop handle into the correct position.
A saw blade can not be used in connection with a loop handle.
Secure the loop handle in a location that provides a good grip.
Slide the foam grip onto the right loop handle.
Always install the loop handle on the tool before operation.
Slide the spacer into the slot in the loop handle.
Fix the loop handle on the shaft with four screws.
Rock the tiller forward so that it rests on its front loop handle.
Place the loop handle and the bottom clamp on the shaft.
Carry the unit properly balanced by the drive tube or loop handle.
Always be sure that the loop handle is installed securely before operation.
Fit the hanging ring between the rear handle and the loop handle.
Solid loop handle makes it easy to take your favorite beverage on the go.
Do not adjust position of the loop handle too close to the control grip.
N Place the friction liner in the loop handle.
Helps protect hand on loop handle from contact with the cutting blades.
Usage of metal blades not permitted Loop handle.
Left hand on the loop handle and right hand on the control handle.
A factory-new machine comes with the loop handle already mounted.
Fix the loop handle with a bolt and a washer to the gear cover.
Starting with Loop handle design.
The inner loop handle has proximal ends fastened to the common base portion.
Correct adjustment of cutting cord 4 - Assembly of loop handle and personal safety bar.
Note that the loop handle must be fitted between the arrows on the shaft.
For special applications, such as for trimming edges, the loop handle can be moved 90 degrees.
Place the loop handle and the bottom clamp over the rubber sleeve.
ATTACHING THE HANDLE - Fix the loop handle on the shaft as shown.
Loop Handle For easy control of the machine.
Adjust carrying harness and loop handle to suit your size before starting work.
Loop handle and remove the oil fill cap / dipstick.
The joiner also includes a loop handle portion formed underneath the stick handle portion.
Loop handle pins to generator frame as shown in Figure 1.
Version with loop handle Controls.
N Place the clamp ( 3 ) against the drive tube and push it into the loop handle.
