Examples of 'loop resistance' in a sentence
Meaning of "loop resistance"
loop resistance: In electrical engineering, loop resistance refers to the total resistance in a closed circuit loop. It is an important parameter to consider when analyzing the efficiency of an electrical system
How to use "loop resistance" in a sentence
Basic
Advanced
loop resistance
Adjust power supply or reduce loop resistance.
Loop resistance of the line.
Increase power supply voltage or decrease loop resistance.
They tried how the loop resistance will change with external magnetic fields.
Alarm system control panels have specifications for allowable loop resistance.
Ground loop resistance Measuring.
All you need is a resistance band and a mini loop resistance band.
Pink Loop Resistance Resistance Loop gives you the ability to perform exercises.
The device has a central harness member and a pair of closed loop resistance tubes.
The closed loop resistance tubes 1 may vary in length according to size and tension needed.
If an open circuit occurs, the loop resistance becomes infinite.
If the loop resistance measured is 16 ohms or higher, commissioning will be terminated!
If so, the loop impedance measurement performed is a loop resistance measurement by excess.
Is the loop resistance in ohms ;.
If an open circuit is detected by the monitor, the loop resistance becomes infinite.
See also
Cable length loop resistance x rho x cross-section / divided by two L R x rho x A /.
Length ( or tension ) adjustment may also be provided for the closed loop resistance tubes.
Document reference [ 3 ] describes a loop resistance test sensor to monitor the integrity of cable shielding.
Uext . minimum supply voltage RL total measuring loop resistance.
The loop resistance measured must not exceed 11 ohms!
A handle 2 may be mounted to each closed loop resistance tube 1.
Excessive loop resistance Increase power supply voltage or decrease loop resistance max 620 ohms @ 24 VDC.
Resistance unbalance DC max % of loop resistance 2%.
The loop resistance must be under 10Ω.
Cable length loop resistance x rho x cross-section / divided by two L R x rho x A /, 2 A cross-section / rho 56 for copper LUXMATE guidelines.
You'll also be interested in:
Examples of using Loop
Show more
Change the loop number at the keypad
Loop with snap hook for keys
Time and space loop in on themselves here
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
