Examples of 'loss of adhesion' in a sentence
Meaning of "loss of adhesion"
loss of adhesion: This phrase refers to the failure of two surfaces to stick or bond together as intended. It is often used in technical or scientific contexts, such as in the study of materials and adhesives
How to use "loss of adhesion" in a sentence
Basic
Advanced
loss of adhesion
No loss of adhesion was found for any of the samples.
Many times repositionable without loss of adhesion force.
The percentage loss of adhesion on water immersion is also given.
Its adhesion is also very inadequate with a total loss of adhesion.
This in turn causes a loss of adhesion with acantholysis as a result.
Development of thicker oxides will cause spalling and loss of adhesion.
This can result in a loss of adhesion down the road.
A loss of adhesion is indicative of crosslinking with the available secondary amine groups.
This processing can lead to undercutting of metal film and loss of adhesion.
However a loss of adhesion is often observed after a long contact with water.
Each sheet of the pad is removable without apparent deformation or substantial loss of adhesion.
The loss of adhesion at either interfaz can doom the usage of the materials.
Coating compositions based on monocyclic oxazolidines may exhibit a loss of adhesion over time.
Loss of adhesion in these cases is due to the adhesive absorbing moisture and swelling.
Deterioration of paint binders by mold and bacteria contributes significantly to the loss of adhesion.
See also
The loss of adhesion and integrity is particularly exaggerated when the article is wetted.
This may cause bond rupture between the layers and thereby loss of adhesion.
The loss of adhesion at either interface can doom the usage of the materials.
These bullous occur by acantholysis loss of adhesion between epithelial cells of the Malpighian layer.
Storage life up to 9 months without significant loss of adhesion strength.
A rating of 100 means complete loss of adhesion and a rating of 0 means no loss of adhesion.
Withstands heat forming and cutting without cracking, chipping, or loss of adhesion.
Water at an interfaz leads to loss of adhesion and / or corrosion.
Withstand heat forming and cutting without cracking, chipping or loss of adhesion.
Glide-snow avalanches are caused by a loss of adhesion at the snow / ground interface.
Removed and examined the panel immediately for any cracking, or loss of adhesion.
Indeed, persistent vibrations cause loss of adhesion and thus, poor steering of the ski.
Crystals on the surface of the pressure-sensitive adhesive system can result in loss of adhesion.
There is, therefore, no loss of adhesion to the surface.
It is likely that 0 % substrate fiber tear under those conditions would signal a loss of adhesion.
Salt-spray tests showed that less than 5 mm loss of adhesion from scratch resulted after 2 weeks.
The comparative inorganic phosphate salts ( DAP and MAP ) resulted in a loss of adhesion.
Grade 1, No cracking or loss of adhesion at bend.
These inks have a high stability even at temperatures over 200°C without discoloration or loss of adhesion.
Greater than 50 % loss of adhesion and coating surface.
Inclusion of 50 % drug, in the same manner, resulted in some loss of adhesion upon expansion.
The grade 5 corresponds to the total loss of adhesion ( a value of between 0 and 1 is necessary ).
At first, the speed ( km / h ) of initial loss of adhesion of the tyres V.
You'll also be interested in:
Examples of using Adhesion
Show more
Test for adhesion performance on wet surfaces
Transition from high to low adhesion surfaces
Very high adhesion and quick drying
Examples of using Loss
Show more
The loss of a huge amount of farmland is threatening
We have all suffered loss of those closest to us
Loss of unemployment benefits due to refusal of work
