Examples of 'low resistivity' in a sentence
Meaning of "low resistivity"
low resistivity - Low resistivity refers to the property of a material to impede or resist the flow of electrical current with minimal opposition. It indicates that the substance has a low resistance value, allowing electricity to pass through easily. Low resistivity materials are often used in electrical conductors and circuits to minimize energy loss and maximize efficiency in transmitting electrical signals or power
How to use "low resistivity" in a sentence
Basic
Advanced
low resistivity
A material having low resistivity is a good conductor.
An important characteristic of this coating is its low resistivity.
Its low resistivity compared to platinum or nickel.
Preferred dopant in low resistivity ranges.
The electrodes are advantageously of a conductive material having a low resistivity.
A good detection of low resistivity anomalies in a conductor terrain.
Vertical cavity laser of low resistivity.
A low resistivity indicates a material that readily allows electric current.
Good conductors have low resistivity.
A low resistivity indicates a material that readily allows the movement of electrons.
It must present low resistivity.
Low resistivity can also improve the quality of contacts to the silicon.
Process for producing a transparent layer with low resistivity.
Conductors tend to have low resistivity while insulators have high resistivity.
Such cement is particularly serviceable since it is a low resistivity cement.
See also
Process for forming a low resistivity titanium silicide layer on a silicon semiconductor substrate.
Because of their low resistivity.
The alloy has low resistivity and is not easy to use at high frequency.
These models can allow much faster reconnection at low resistivity.
A low resistivity of the conductors is therefore an essential parameter in choosing the materials used.
The use of a metal protection layer enables these devices to be of low resistivity.
The carbon will be chosen to produce low resistivity for low volume filling.
The low resistivity at comparable apparent permselectivities is strong indication of a lack of random defects.
The carbon will be selected to produce low resistivity for low volume filling.
A low resistivity ON state is thus achieved.
The piezoresistive effect of the ITO layer is measurable but corresponds to low resistivity variations.
Metal layer having a low resistivity but containing impurities causing a spin flip of the electrons.
The resistor pieces 3 are made of a material of low resistivity.
In particular copper has a very low resistivity but aluminium and chrome also have a low resistivity.
Low resistivity graphite electrode China Manufacturer.
Advantageously, such a gasket would also have a low resistivity.
The extremely low resistivity ( high conductivity ) of silver is characteristic of metals.
The spiral spring resistor 4 is made of a material of low resistivity.
Thus, low resistivity supports such as metal supports are very suitable.
Advantageously, these properties should be obtained while retaining a low resistivity.
Low resistivity metals such as copper, brass and aluminum take longer to heat.
The conductor 10 is advantageously made of copper or a material with low resistivity.
Low resistivity for access resistors, low electric permittivity for the capacitors.
However, this technique is still applicable only to powders of low resistivity.
Therefore, even nonmagnetic metal with low resistivity such as aluminum is efficiently heated.
In particular, the internal conductor is preferably of silver having a low resistivity.
The carbon fiber useful herein is a low resistivity pitch-based fiber.
On the contrary, it is advantageous to use electrically conducting films of very low resistivity.
High surface resistivity encourages charging, whereas low resistivity causes the charge to dissipate.
However, unlike gallium arsenide ( GaAs ) semiconductor substrates, silicon substrates have low resistivity.
FIG . 4 shows the formation of low resistivity accesses to the source and drain regions.
Multi-ligament spraying is generally not practicable with low resistivity liquids.
A material with low resistivity is highly conductive, and vice-versa.
Advantageously, a material in the second layer is chosen which has as low resistivity as possible.
Note the very low resistivity and high permselectivity of Sample 24.
You'll also be interested in:
Examples of using Low
Show more
A low indicator indicates a healthy financial position
I am setting the bar low so we are not disappointed
Low temperatures have an effect on vehicle start up
Examples of using Resistivity
Show more
The resistivity due to these collisions is small
A material having low resistivity is a good conductor
Resistivity andhall effect of germanium at low temperatures
