Examples of 'low shear' in a sentence
Meaning of "low shear"
refers to a condition or state where there is minimal or reduced friction, strain, or stress. In various contexts, it can describe a mechanical, chemical, or fluid process with low levels of agitation or turbulence
How to use "low shear" in a sentence
Basic
Advanced
low shear
Conventional low shear mixers can be employed.
Determination of rheological parameters at low shear rate.
Low shear and virtually no pulsation.
The mixing was then reduced to low shear.
Low shear is applied to the mixture in the extruder.
Preferably this agitation is under low shear.
Low shear with almost zero pulsation sinusoidal pumps.
This composition is used in low shear processes.
Low shear handling for particulates and soft solids.
The primer was prepared using a low shear mixer.
Low shear stirring is sufficient.
The samples were prepared under low shear conditions.
The low shear rate is required to minimize changes to the product.
The bed is kept in motion by low shear mixers.
Low shear rates create multilamellar liposomes having multilayered structures.
See also
Mixing is generally performed under low shear conditions.
Steady low shear agitation was continued until the polymer was dispersed.
It is capable of building viscosity under relatively low shear.
This is a low shear process.
Coating compositions are prepared by using a low shear mixer.
Apply low shear mixing until a visibly homogenous solution is achieved.
Plastic fluids are not able to flow at low shear stresses.
Low shear mixing ensures uniform particle dispersion without material degradation.
The talc was then added with low shear mixing.
Low shear action prevents aeration and foaming during product transfer.
The coating composition is prepared using a low shear mixer.
Viscosity at low shear rates tends to influence flow and levelling properties.
The perfume was then added using low shear mixing.
The low shear viscosity was the viscosity measured at the lowest frequency.
Emulsifier was added and mixing continued under low shear.
This usually involves low shear blending of the granules with a powdered lubricant.
This involves viscosity testing at relatively low shear rates.
All mixing was performed under very low shear conditions and at room temperature.
The viscosity of the composition is maintained up to very low shear rates.
The screened contents are mixed in a low shear mixer for a suitable amount of time.
The microparticulate component is then added under low shear mixing.
Low shear is meant to refer to lower shear than applied during conventional homogenization.
The remaining components are then added under low shear conditions.
Use of low shear and variable speed pumping reduces energy consumption of the system.
The coating is prepared in the lab using a low shear mixer.
The blending was carried out under low shear at elevated temperature to form fluid melts.
Filling materials should also have a relatively low shear modulus.
An additional low shear half element was added after the conveyor elements to increase mixing.
The resultant mixture was slowly cooled with low shear mixing.
A semisolid does not flow at low shear stress and generally exhibits plastic flow behavior.
An aqueous binder solution of hydroxypropyl cellulose in water is placed in a low shear mixer.
In large reactors it is difficult to maintain low shear and still provide uniform mixing.
The mixture was then allowed to cool to room temp under low shear.
Preferably the underflow solids are subjected to low shear by a standard raking mechanism.
The flake pigments are satisfactorily dispersed in a binder component by stirring under low shear.
You'll also be interested in:
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
Examples of using Low
Show more
A low indicator indicates a healthy financial position
I am setting the bar low so we are not disappointed
Low temperatures have an effect on vehicle start up
