Examples of 'lower cutting' in a sentence
Meaning of "lower cutting"
lower cutting: Refers to reducing or decreasing something, often in terms of costs, prices, or quantities
How to use "lower cutting" in a sentence
Basic
Advanced
lower cutting
Fully lower cutting units to the ground.
Tiltable guard hood of the lower cutting table.
Lower cutting pressure and long tool life.
Use of the lower cutting table.
Lower cutting deck to lowest position.
Cutting operation with the lower cutting table.
A lower cutting power has been selected.
Higher knife pressures need lower cutting speed.
Lower cutting deck unless a positive mechanical lock is used.
The cutting direction is inward on the lower cutting edge.
Lower cutting forces and shorter chips than other solutions.
Installing the stationary safety guard on the lower cutting table.
The lower cutting board can be repetitively used by changing its arrangement.
It includes an insert support that engages the insert at the lower cutting edge.
Lower cutting forces reduce power consumption and reduce tool wear.
See also
Double positive cutting edge geometry offers lower cutting resistance for improved machining efficiency.
Never lock the motor power switch when working with the lower cutting table.
Clean the upper and lower cutting plates with a soft cloth or brush.
Move the assembly cutting head / lower cutting.
You will also benefit from lower cutting tool cost and increased availability of your machines.
This compact machine, is designed especially for small kitchen with lower cutting quantities.
Please note that the lower cutting height settings may only be used for optimum conditions.
If you want to cut the grass lower, pass over again with a lower cutting position.
For a lower cutting height, use the upper hole.
Position protective guard 49 of the lower cutting table.
Short cutting time, lower cutting forces and smoother running.
The upper blade edge 34 is parallel to the lower cutting edge 24.
A lower cutting region capable of hollowing out a profile of the bottom of the hole ;.
When cutting undulating areas, lower cutting heights may cause scalping.
For a lower cutting level, raise the skid shoe by installing pin ( C ) in the bottom hole.
The fastener insert unit 68 has an enlarged lower cutting plate 70 with appropriate cutting edges 72.
The lower cutting head 26 contains an anvil.
Slightly lubricate the upper and lower cutting plates with special lubricant for blades GT604.
Lower cutting height, N Use the height adjusting lever ( 1 ) to.
Slightly lubricate the upper and lower cutting plates with special lubricant for shearing heads GT604.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Lower
Show more
Lower school enrolment for disadvantaged children
Fractures to the lower legs and feet
Lower right hand corner is the number
