Examples of 'lowest speed' in a sentence
Meaning of "lowest speed"
Lowest speed refers to the slowest rate of motion or the minimum velocity that can be achieved in a given context, such as in physics or transportation
How to use "lowest speed" in a sentence
Basic
Advanced
lowest speed
Turn blower on lowest speed for cleaning.
Always start mixing at the lowest speed.
Mix on the lowest speed until most of the lumps are gone.
The fan operates at its lowest speed.
Desires lowest speed of unification.
The screw revolved at its lowest speed.
Use the lowest speed on the drill to install the hinge wire.
Variable suction set to the lowest speed.
Rotate the rollers at the lowest speed setting on the control panel.
The objective is to obtain the lowest speed.
The lowest speed setting is automatically selected you switch on the multicopter.
Turn the blender on to its lowest speed.
Set the lowest speed to obtained the best results of grinding nuts.
Apatosaurus has the lowest speed in the game.
The citrus press must only be operated at the lowest speed.
See also
Beat your ingredients on the lowest speed for about three minutes.
The lowest speed is when the dial is turned all the way to the left.
Always begin blending at the lowest speed setting.
Check setup at the lowest speed before you increase to the operating speed.
Always begin processing at the lowest speed setting.
Use the lowest speed when mowing on slopes or high, wet grass.
Drive on the ramps at the lowest speed possible.
To avoid splashing the ingredients out of the bowl, always start at the lowest speed.
I have to use some passages at the lowest speed of my triple plateau.
By leaving the gear lever in position 1, the vehicle travels at the lowest speed.
The power tool starts with the lowest speed at each starting procedure.
To this end, a vortex unit is used at the lowest speed.
Then start the polishing process at lowest speed and slowly increase the speed.
Flip the jar onto the blender base and blend, on lowest speed.
When mixing dry ingredient use the lowest speed to minimise dust emission.
If your machine is equipped with a variable-speed functionality, always start at lowest speed setting.
The motor was turned on at the lowest speed and the corresponding torque reading displayed.
It is helpful to begin the blending process on the lowest speed and then.
Always start blending on lowest speed setting, then progress to desired speed.
For quiet night time operation set the switch to the lowest speed setting.
The wind speed will return to the lowest speed when running in the highest speed.
Again, you will be working on the lowest speed.
Start blending on the lowest speed and then increase to a higher speed, if necessary.
Begin mixing at the lowest speed.
And have the lowest speed rate by far . Says here we are winless in America.
Run the saw at lowest speed.
Is the lowest speed where the power is 55 per cent of maximum power.
The fan will operate at the lowest speed setting.
STIR ( Slow ) The lowest speed is for incorporating ingredients.
The green light is the indicator of the lowest speed on the device.
Mixing start with the lowest speed and increase to MAX 50 % of total speed.
The angle polisher starts gently and reaches its lowest speed after a short time.
Depress the “ I ” position for lowest speed and depress “ II ” position for a given number setting.
Says here we are winless in America and have the lowest speed rating by far.
The mixer is mixing at the lowest speed and the green indicator light ( 2 ) illuminates.
You'll also be interested in:
Examples of using Lowest
Show more
Lowest compared to other renewable energy sources
Student performance at the lowest levels of proficiency
Use lowest possible pressure to flush equipment
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
