Examples of 'main shaft' in a sentence
Meaning of "main shaft"
Main shaft: Referring to the central or primary rod or axis of a rotating or moving object
How to use "main shaft" in a sentence
Basic
Advanced
main shaft
Outside ofthis main shaft there is no overheads.
Main shaft running through the assembly.
Outside of this main shaft there is no overheads.
Main shaft device for boring machine.
You come down in the main shaft.
The main shaft is coupled to the generator.
Far enough to free the main shaft.
Mount the main shaft cover.
The main shaft is supported by two main bearings.
We will meet in the main shaft by the elevator.
The main shaft is coupled to the crankshaft vÃa a clutch.
Fit the swashplate over the main shaft.
Retarding torque obtained at main shaft of endurance braking system.
Main gear has slipped on the main shaft.
Blockage is down this main shaft and up a feeder tunnel.
See also
Stainless steel pinion gear and main shaft.
The main shaft is connected vÃa a reducing mechanism to a drive motor.
To the west of the main shaft.
The main shaft of a transmission.
You check the main shaft.
This main shaft is set in the bore on core shaft.
Just had a mountain cave in on the main shaft.
The main shaft area is fenced off for safety reasons.
This leads to the main shaft.
Besides the main shaft there existed two other shafts.
They went down into the main shaft.
The main shaft.
This ai not the main shaft.
The main shaft of the penis is covered by relatively thick skin.
Replacemet work of the beargin of the main shaft.
Blocked main shaft.
By changing the rotational speed of the main shaft.
A structural improvement for main shaft of tooling machine.
The main electrical contacts are actuated by the main shaft.
Main shaft deflection.
Bearings for the main shaft.
The main shaft is supported by the lubricant fluid when rotating.
The speed of the main shaft.
The main shaft is supported by a bearing arrangement within a bearing housing.
Press the side brush against the main shaft.
Verify the main shaft and tail rotor are not damaged or bent.
We will have iron ladders down the main shaft.
Must be used in combination with a main shaft that hasa bearing diameter of.
These service tunnels run between the main shaft.
The loads get higher as the main shaft increases in speed.
The centrifugal compression stages are supported by the main shaft.
This is the main shaft.
An encoder is disposed in the vicinity of the end of the main shaft.
To seal the main shaft.
The rotation angle sensor detects a rotation angle of the main shaft.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using Main
Show more
The main themes that emerged included
How to set the main knife parameters
The main focus is on the dangers of disease
