Examples of 'maintained at a temperature' in a sentence
Meaning of "maintained at a temperature"
maintained at a temperature - keeping something at a specific temperature to ensure its proper functioning or condition
How to use "maintained at a temperature" in a sentence
Basic
Advanced
maintained at a temperature
They are maintained at a temperature close to room temperature.
Flammable liquid substances and preparations maintained at a temperature above their boiling point.
An oil bath maintained at a temperature range suitable for affecting reaction.
The needle is passed through the cannula while it is maintained at a temperature below As.
The reactor is maintained at a temperature sufficient for polycondensation to take place.
A process according to claim 1 wherein the reaction mixture is maintained at a temperature above ambient temperature.
The mixture is maintained at a temperature that encourages the growth of the mordenite.
The reaction mixture in the continuous loop reactor system is maintained at a temperature of about 2°C.
The cooling water is maintained at a temperature below the resin melting temperature.
Perform the same procedure with the freezer, which must be maintained at a temperature of 0?
It is maintained at a temperature above the melt temperature of the first thermoplastic resin.
Therefore, the wrapping member can be maintained at a temperature necessary for preshrinkage.
This reservoir is maintained at a temperature producing a specific and repeatable vapor pressure of ferrocene.
A refrigeration appliance according to claim 1, wherein said first compartment is maintained at a temperature below 0 ° centigrade.
If the sodium bicarbonate solution is maintained at a temperature sufficient to prevent sodium sulfate precipitation.
See also
maintained at a constant
maintained at a constant temperature
maintained at all times
maintained by the department
maintained at a constant temperature
maintained at all times
maintained by the department
To avoid their possible crystallization, the four syrups are maintained at a temperature of 70 ° C.
The oil column was maintained at a temperature sufficient for the oil to not freeze.
After aging, the composites are immersed in a water bath maintained at a temperature of 80 ° C.
The reactor itself is maintained at a temperature such that the polymerization catalyst is activated.
The measurement is carried out in a climate controlled chamber maintained at a temperature of 23 ° C.
The gelatin solution is maintained at a temperature at which the gelatin solution remains liquid.
The gelling bath was stirred at a moderate rate, while being maintained at a temperature of 22 °C.
The mold temperature was maintained at a temperature which was for all practical purposes constant.
Suitably it is incorporated in the composition and maintained at a temperature below 170°C.
This roll is typically maintained at a temperature about the temperature of the molten metal.
The flask was then immersed in an oil bath maintained at a temperature of 50°C.
The water bath is maintained at a temperature substantially lower than that of the molten extrudate.
Preferably, the heated solution is cooled and maintained at a temperature of about 5°C.
Water loop 2 is maintained at a temperature below the temperature of warm water loop 3.
The reaction medium is stirred vigorously while maintained at a temperature in the region of 30 ° C.
Chill roll 32 is maintained at a temperature lower than temperature of the temporarily inactivated material.
The reaction mixture was agitated and maintained at a temperature of about 30°C.
The mixture is maintained at a temperature T2 as defined above, stirring continuously.
Freezer Vaccines that must be frozen should be maintained at a temperature of -15°C or colder.
The gaseous medium is maintained at a temperature suitable for chemical vapor deposition by a heater device 18.
The reaction was subjected to magnetic stirring and maintained at a temperature of 80°C overnight.
The bath was maintained at a temperature of 70 ° C. below the liquidus of the composition.
The fused alloy 5 in the crucible 3 is maintained at a temperature by a heating coil 4.
The emulsion was maintained at a temperature of 40 ± 5°C during microfluidization through the use of a cooling mechanism.
The polyurethane was then allowed to absorb ink, and was maintained at a temperature of 60°C.
The mold temperature may be maintained at a temperature suitable for either hot or cold molding.
The sheets were dried in contact with a sheet of Teflon maintained at a temperature of 105°C.
The flue gas temperature is maintained at a temperature greater than the acid dew point temperaure.
The polymer was attenuated into fibers by an annular airstream maintained at a temperature of 250°C.
The separation device was maintained at a temperature above the melting point of the depolymerized PET.
Conveniently the contents of said second vessel are maintained at a temperature below 40°C.
The feed water is maintained at a temperature of approximately 48°C.
During the neutralization step, the reaction solution was maintained at a temperature of 5 °C or lower.
This emulsion was maintained at a temperature of about 80°C with constant stirring.
Preferably, the heated suspension is cooled and maintained at a temperature of about 25°C.
You'll also be interested in:
Examples of using Maintained
Show more
The clock is maintained by the internal battery
The right to the assistance of a lawyer was maintained
Activities will be maintained in the event of rain
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
