Examples of 'material to be cut' in a sentence
Meaning of "material to be cut"
material to be cut: this phrase refers to materials (e.g., fabric, paper) that need to be trimmed or removed in the process of creating or modifying something
How to use "material to be cut" in a sentence
Basic
Advanced
material to be cut
Ensure that the material to be cut is secure.
Select saw blades in relation to the material to be cut.
The material to be cut is placed on a large table.
Set depth adjustment according to material to be cut.
Type of material to be cut speed range.
Select saw blade in relation to material to be cut.
Be sure material to be cut is held firmly.
Lutions is suitable for the material to be cut.
Be sure the material to be cut is rigid.
Two massive cylinders support material to be cut.
Fasten the material to be cut to the work table.
Always lubricate the material to be cut.
Mount the material to be cut solidly in a vise or other clamping.
Line up wheel with material to be cut.
The material to be cut must always be free of oil or grease.
See also
Always start tool before engaging material to be cut.
Make sure the material to be cut is firmly held to prevent movement.
Selecting the best blade by type of material to be cut.
Swing the unit into material to be cut from your left to.
The energy required is determined by the material to be cut.
Place paper or desired material to be cut on top of the die.
Do not attempt to turn on when blade is against material to be cut.
Keep the material to be cut secure and push it against the.
Automatic positioning of the material to be cut.
The saw enables the material to be cut on both sides in one operation.
Remove excess mill scale or rust from material to be cut.
Do not try to hold material to be cut off with your hand.
Select the proper blade for the material to be cut.
Slide the material to be cut under the transparent pressing rail at the required position.
Place this tool on the material to be cut and align.
Method of flattening the edges of a swatch of flexible material to be cut.
The answer depends on the material to be cut and operation conditions.
The disc specification is unsuitable for the material to be cut.
The material to be cut extends from the roll into engagement with an anvil roll.
Select the correct blade for the material to be cut.
Place material to be cut on top of a Cutting Pad.
Mark the area to be cut out on the material to be cut.
Place the material to be cut against the fence 7.
Select a saw blade as applicable for the material to be cut.
The material to be cut is intended to be placed level on base 2.
They use interchangeable blades depending on the material to be cut.
For accurate work, be sure material to be cut is anchored firmly.
Check the specifications to ensure the suitability of the material to be cut.
Adjust the speed according to the material to be cut and working efficiency.
Parts for aircraft are frequently manufactured by cutting a huge material to be cut.
Do not remove cut material nor hold material to be cut when blades are moving.
The visual positioning aids simplify correct alignment of the material to be cut.
Thus, the material to be cut is only slightly affected by the cutting moisture.
A special problem arises when the material to be cut up is leather.
Place the material to be cut onto a flat surface such as a workbench, table or floor.
You'll also be interested in:
Examples of using Cut
Show more
Or someone she cut loose got mad
Cut wire liner at the right length
Now you cut this man down
Examples of using Material
Show more
Dried material can be removed with acetone
Abstracts must present material in a clear manner
The material scope of immunity ratione personae
