Examples of 'measured signals' in a sentence
Meaning of "measured signals"
measured signals - refers to signals that have been quantified or assessed in terms of strength, intensity, or quality
How to use "measured signals" in a sentence
Basic
Advanced
measured signals
Then the measured signals are stored in a memory.
The process transmitter registers one or two analogue measured signals.
The measured signals are used to classify a characteristic of a passenger.
It focused on the comparison of measured signals in presence or absence of glare stimuli.
It is used essentially for reducing noise from the measured signals.
Each of the measured signals corresponds to a concentration of sterilant vapor.
The invention provides a method for signal processing of measured signals.
Processing the measured signals and comparing them with reference parameters.
The monopulse method does not require that the measured signals are pulsed.
The measured signals are combined such that the desired loads are calculated.
During the investigation there is no control on the validity of the measured signals.
The measured signals indicate inherent optical aberrations of the wavefront sensor.
A summary of findings concerning the characteristics of the measured signals is also included.
The measured signals delivered by such sensors are directly related to the pollutant emissions.
An alarm only is generated if the predetermined and the measured signals are different.
See also
Finally the measured signals are summed to achieve the result of the total measurement.
The various fluid compartments of a human body contribute differently to the measured signals.
Elevator door fault detection with measured signals and a neural network application.
Several techniques will now be presented for aligning the reference and measured signals.
The measured signals can be used for the determination of a paint formula with a matching colour.
In the inventive method the state estimator relies on measured signals to compute state estimates.
The measured signals are converted to RMS current and voltage values through known scaling factors.
This property can be used to find a suitable alignment between the reference and measured signals.
Inferring tissue parameters from experimentally measured signals is very important in diffusion MRI.
Those measured signals are amplified to about plus or minus 2 volts.
This analysis can comprise Fourier transformation of the measured signals.
The FT method is used to decode the measured signals and record the wavelength data.
The measured signals depend on many factors, both experimentals and instrumentals.
The DSL performs the signal processing of all measured signals in the sensor.
In fact, measured signals are the sum of theoretical signals and measurement noise.
However, the method is sensitive to error of measured signals.
In a preferred embodiment, the measured signals are part of traffic, paging and access signals.
The scrutinizing module 5 generates corresponding intermediary signals from the measured signals.
Accordingly, an additional circuit for distinguishing measured signals with respect to time is necessary.
The fault detecting unit 50 is configured to supervise and compare the measured signals.
The measured signals from the transducers 2 may be processed directly in the black box.
The scrutinizing module 5 compares the measured signals to given signals.
The measured signals had an overall shape as shown in Figure 2.
The operating diagram of the processing circuit for the measured signals is shown in FIG . 3.
All measured signals are then fed to a microprocessor 28.
The instrument 's internal GPS also shows the precise location of the measured signals.
The measured signals are passed through measurement converters 4 to 6.
The ' Hz'function enables you to measure the frequencies of measured signals up to 5 MHz max.
The measured signals are sampled over a period of 30 minutes or more.
FIG . 3 the operating diagram of the processing circuit for the measured signals.
Fig.12 is a polar plot of the measured signals about the strains measured by the sensors ;.
Such signal should be included into the group measured signals 600.
FIG . 2 the three measured signals are coherent.
Neither time nor temperature had an influence on the measured signals obtained ( Fig . 4 ).
The first and second measured signals are associated with the signals 34a, 34b in this example.
You'll also be interested in:
Examples of using Measured
Show more
The measured values shall be plotted on a graph
Asteroid composition is measured by radar and seismometry
You measured right up to him this afternoon
Examples of using Signals
Show more
Output signals common to measuring technology are available
Hilarious shirt that signals we drink alcohol
Signals an important instruction related to the pump
