Examples of 'measurement distance' in a sentence
Meaning of "measurement distance"
measurement distance - Refers to the calculation of the space between two points or objects, often used in various scientific, engineering, or navigational contexts
How to use "measurement distance" in a sentence
Basic
Advanced
measurement distance
Select measurement distance within the range of measurement.
Even such basic information as measurement distance is rarely reported.
Measurement distance screen.
The smallest size of the measurement spot at a measurement distance of.
D is the measurement distance.
Count how many intervals on the eyepiece graticule cover the measurement distance required.
The maximum measurement distance varies with target and environmental conditions.
The result is the absolute length of the measurement distance in mm inch.
Image measurement Distance between two points.
The focus distance of the telescope sets the measurement distance for the system.
The measurement distance shall be in minimum 3 m.
M and a detector with a diameter of approximately 10 mm or at a measurement distance of.
At either a measurement distance of 10 m and a detector with a diameter of approximately 10 mm.
The smaller the target, the smaller the measurement distance between thermometer and.
Note, Solid angle can be calculated from the known detector 's area and measurement distance.
See also
If article size is smaller, the measurement distance is adapted to 85 % of the sample size.
The distance between the two quartz glass windows constitutes the length ( L ) of the measurement distance.
Stability, after preheating, zero excursion and measurement distance excursion in 4 hours should not be.
As the measurement distance ( D ) increases, the measurement spot increases in diameter.
Emission radiated from housing, 3m measurement distance.
O Tests and Measurement Distance learning is available??Structural arrangements single department or faculty?
In practice, that is tantamount to limiting the measurement distance to about 10 cm.
P927 Distance Measurement Distance from transducer face to material.
Measurement distance Up to 10 metres.
Ratio between measurement distance and size of measurment point of 16, 1.
The measurement distance was 2.5 mm, and the mean of three measurement values was used.
The measurement distance was set at 2.5 mm, and the average value for 3 measurements was used.
You'll also be interested in:
Examples of using Measurement
Show more
Market risk measurement and limits in trading
Systolic or diastolic pressure was outside the measurement
Airflow measurement and revision of test standards
Examples of using Distance
Show more
Toll or long distance charges may apply
Distance travelled to work and time taken
In the symbol the distance to be measured is dark
