Examples of 'measuring procedure' in a sentence
Meaning of "measuring procedure"
Measuring procedure refers to a specific set of steps or guidelines to be followed in order to accurately measure or quantify something. It is commonly used in scientific experiments, quality control processes, and various other fields where precise measurement is required
How to use "measuring procedure" in a sentence
Basic
Advanced
measuring procedure
The measuring procedure of a poem is very rigorous.
This corresponds to the normal measuring procedure.
Only one measuring procedure on a single device is required.
Mortar air amount measuring procedure.
Measuring procedure yields the same results on repeated.
The accuracy of the measuring procedure should be ensured.
A sufficient tightness can be easily measured by a suitable measuring procedure.
The measuring procedure is standard for any phone.
Do not talk or move during the measuring procedure.
The complete measuring procedure will have to be repeated.
The quality is permanently monitored according to our standard measuring procedure.
Seat set up and measuring procedure for static measurements.
Additional installation and removal steps before and after a particular measuring procedure are not required.
This measuring procedure can only be used in vertical direction.
The revolutionary measuring procedure.
See also
The measuring procedure is controlled by a computer in the following manner.
Mortar flow measuring procedure.
The measuring procedure must give results represesentative of worker exposure.
Validation of a measuring procedure.
The measuring procedure is then undertaken solely towards an expected aircraft.
Have children practice the following measuring procedure with a partner before taking the materials home.
The measuring procedure must have been tested under practical conditions of use.
Moving, talking or excitement during the measuring procedure.
Air release during the measuring procedure is too fast or too slow.
Press the measuring button 9 to initiate the measuring procedure.
The inflation or measuring procedure is interrupted and an automatic fall in pressure occurs.
Important, do not move or talk throughout the entire measuring procedure.
For OTMs the measuring procedure shall be performed without additional trailer loads.
Do not touch the test probe, it can become very hot during the measuring procedure.
The distance measuring procedure is used to indicate said stop point to the pilot.
Clean the measuring tool with a dry, soft cloth and restart the measuring procedure.
This measuring procedure requires the use of eight sensors for its operation.
Figure 2a shows schematically a measuring procedure according to the invention.
Save measuring procedure The order of the tabs on the touchscreen display follows this sequence.
In this case, the complete measuring procedure will have to be repeated.
Information technology equipment, interference - Limiting values and measuring procedure.
The measuring procedure consists in the following steps,.
Fig . 4 illustrates an example of the actual measuring procedure according to the present invention.
A typical measuring procedure is illustrated schematically in Figure 2, and may be described as follows,.
Such penetration energies can conveniently be assessed using a metallized film P.E. measuring procedure as follows.
If not, the measuring procedure is repeated for the next transducer location.
Press the “ HOLD ” button 2 once more to stop the measuring procedure again.
The inflation or measuring procedure is interrupted and an automatic fall in pressure occurs fig . 6.
Press the “ HOLD ” button 2 to stop the measuring procedure.
Closing the measuring procedure Saving the measured results 1.
Por example, up to 1971 workplaces in Germany were classified by the tyndallometric measuring procedure.
If NO, the measuring procedure is finished.
For example, up to 1971 workplaces in Germany were classified by the tyndallometric measuring procedure.
The inflating and measuring procedure can be Stoped by pressing the Start / Stop button.
Viscosity is determined in a simplified measuring procedure using the supplied measuring cup see Fig . C.
You'll also be interested in:
Examples of using Measuring
Show more
Method of measuring the response time on vehicles
Manufacturer of the separate temperature measuring equipment
The measuring instrument is not water tight
Examples of using Procedure
Show more
Informed consent procedure for certain hazardous
Procedure for submitting original information anonymously
Reverse the procedure to close the lens
