Examples of 'melt temperature' in a sentence
Meaning of "melt temperature"
melt temperature: The temperature at which a solid substance changes to a liquid state through the process of melting
How to use "melt temperature" in a sentence
Basic
Advanced
melt temperature
The melt temperature was not measured.
These mixtures are then subjected to a melt temperature assay.
The melt temperature was measured at the die with a pyrometer.
The compositions also feature an increase in the melt temperature.
Extruder melt temperature.
Strippable semiconductive composition comprising low melt temperature polyolefin.
The melt temperature.
The surface temperature was determined by the melt temperature of the slag.
The second melt temperature is higher than the first melt temperature.
The emulsifier systems affect the melt temperature of a given composition.
Lower melt temperature produced lower shrinkage values relative to filament velocity.
These emollients have little affect on the melt temperature of a composition.
The melt temperature is kept constant by changing the extruder temperature profile.
The inventive process breaks free of this melt temperature trap.
This results in a lower melt temperature and slower crystallization rate.
See also
The tool surface is held below the matrix resin melt temperature.
The second temperature or die melt temperature is typically the foaming temperature.
The melt temperature is taken as the highest peak temperature in the second heat.
With agitation heat to above the melt temperature of the fatty alcohols.
The melt temperature could be lowered by using a better cooling device on the extruder.
It is maintained at a temperature above the melt temperature of the first thermoplastic resin.
The melt temperature during film forming will depend on the film components.
The temperature is increased until the melt temperature of the material is reached.
The melt temperature and pressure was monitored in the die section of the extruder.
The extrusion conditions were set above the melt temperature in a conventional profile.
Melt pressure and melt temperature were recorded with thermocouples placed in the adapter.
Such added components may also increase the melt temperature of the compositions.
Selection of the melt temperature for a given system is however a matter of routine optimisation.
Typically hybridization conditions include temperatures which are slightly below the melt temperature.
Cooling the desired shape to below the melt temperature of the syndiotactic polypropylene.
The higher melt temperature also requires longer cycle time during injection molding.
Preferably the fibers are of a resin having a higher melt temperature than resin of the film.
Variations in melt temperature and screw speed also influence the drop time.
Indeed polypropylene resins have poor welding properties because of their high melt temperature.
The second temperature or die melt temperature is cooler than the first temperature.
This melt temperature is dependent upon the hardness and type of the chosen elastomeric material.
For each temperature setting the melt temperature was measured and samples collected.
The melt temperature during the formation of the coated substrate will depend on its components.
Temperature measures were made to confirm the correct melt temperature with the power density.
Increasing the melt temperature consequently reduces the onset or extent of these physical changes.
The ultrafine electrospun fibers have a higher melt temperature than fibers derived by dry spinning.
Emollients that become incorporated into the emulsifier system tend to decrease the melt temperature.
This film develops a melt temperature near or above the barrel temperature at that point.
PHB degrades at temperatures near its melt temperature.
The melt temperature is determined from the DSC endotherm.
This binder will have preferably a melt temperature below the one of the support layer.
The host material may also be a fusible material having a melt temperature Tm.
The PET outer layer may have a higher melt temperature than the polyethylene inner layer.
Solutions which are permanently amorphous do not exhibit a Crystalline Melt Temperature.
The melt temperature profile is given in table 1.
You'll also be interested in:
Examples of using Melt
Show more
It will melt all over the floor
They are just gonna melt the icing
To melt the ice off your girl
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
