Examples of 'metal backing' in a sentence
Meaning of "metal backing"
metal backing - This phrase commonly refers to a support or reinforcement made of metal that is attached to the back of an object. It provides strength, stability, or protection to the item it is applied to
How to use "metal backing" in a sentence
Basic
Advanced
metal backing
The crystal is set into a metal backing.
The metal backing plate had been placed in the mould.
The substrate may comprise a plastics or metal backing layer.
Flap discs made with metal backing are the most aggressive.
The diamond abrasive compact is used as such without a carbide or metal backing.
A metal backing plate ;.
A composite bearing is a bearing with a liner of PTFE compound and a metal backing.
Install the metal backing flange 17 on spindle 5 against the soft mount.
Cleaning the top surface of the metal backing plate ;.
Install the metal backing flange ( J ) on spin.
Sealing washers - usually manufactured from rubber with a metal backing.
The metal backed glenoid 1 includes a metal backing 2 and a plastic bearing 3.
Composite bearings are designed with a self-lubricating polytetrafluroethylene ( PTFE ) liner with a laminated metal backing.
An article according to claim 12, further comprising a metal backing plate bonded to said solder layer.
Metal Backing Ring, Provides a support component to the Metal sealing / anti-extrusion ring.
See also
Sheets of TFE-coated glass sheets were used to prevent sticking to the metal backing plates.
Install the metal backing flange ( I ) on spindle.
How about China announcing that they are going to implement metal backing for the yuan?
Install the metal backing flange ( K ) on.
Screws 4 are used to secure the metal backing 2.
Install the metal backing flange ( G ) on spindle ( E ) against the.
The friction pads 72 are of a composite construction supported by a metal backing plate 74.
FIG . 3 is a perspective view illustrating a plurality of square-cut prepregs 17 for configuring the metal backing 14.
A central post 5 may also be used to secure the metal backing 2.
Figure 2 is a cross-section illustrating the coated target of Figure 1 bonded to a metal backing plate 20.
You'll also be interested in:
Examples of using Backing
Show more
Tighten the backing pad suffi ciently
Backing plate has obvious traces of corrosion
Advertisers are backing out as they prefer digital
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
