Examples of 'metal connector' in a sentence
Meaning of "metal connector"
metal connector: This phrase refers to a device or component made of metal that is used to join or link two or more objects together. It is commonly used in construction, electronics, and manufacturing industries
How to use "metal connector" in a sentence
Basic
Advanced
metal connector
Metal connector nails are not designed to penetrate metal.
Use only one stick of metal connector nails at a time.
The metal connector is therefore connected to the ground of the circuit.
Do you know where to get the little metal connector to repair it.
A flexible metal connector is included to simplify the installation of the appliance.
Loosen the harness and detach the shoulder strap loops from the metal connector.
Connect flexible metal connector to dryer and gas supply.
Second via connecting the second surface to the at least one second metal connector pin.
A flexible metal connector is included to simplify the installation of the unit.
Use only genuine Bostitch metal connector nails.
Process for providing a metal connector fixed to a pipe of composite material and pipe thus made.
Only for installation purpose of pre-punched holed metal connector to wood stud.
Connect this flexible metal connector to the flare fitting on the end of the manifold.
Depending on the size of your gas supply line, flexible metal connector and shutoff.
Assemble the flexible metal connector from the gas supply pipe to the gas entrance nipple.
See also
Through an in-house developed and fabricated glass to metal connector made in PTFE.
Metal Connector Attachment is not adjustable for depth control.
Do not use the tool to install metal connectors without the Metal Connector Attachment installed.
Never use contact trigger ( black trigger ) with metal connector attachment.
Avoid touching the metal connector when handling the USB Adapter.
Use only genuine STANLEY-BOSTITCH metal connector nails.
Have tool and Metal Connector Attachment serviced by an authorized service center.
This tool and nails are designed for metal connector with pre-punched holes.
The metal connector pins of the support member enable to provide both,.
This connector can be, in particular, a metal connector or a connector which itself is highly resistive.
Comes complete with support, mounting material, ca . 4 metre air tube and an metal connector.
If a flexible metal connector is used, be sure the tubing is not kinked.
Only use sequential trigger ( gray trigger ) with metal connector attachment.
Always use the Metal Connector Attachment . see installation instructions.
Figure 10 illustrates application of the connection verification concept to a metal connector body 500.
A full description of a similar metal connector body may be found in U. S.
Note, The Metal Connector Attachment is not adjustable for depth control.
Preferably at the end of step ( d ) the metal connector is placed on a mandrel.
Additional metal connector pins 32 are used as simple electric connectors.
Broken / chipped guide Replace guide metal connector hole Broken / missing.
Thus, such metal connector pins enable to provide both,.
Remove the two belts from the metal connector Fig . 44.
Comes with metal connector for 8 mm pipe.
Second metal connector pins 31 connected to cold source Sf.
Position the metal connector in its specific slot Fig . 45.
Installing the metal connector attachment to your bostitch n88rh-2mcn.
You'll also be interested in:
Examples of using Connector
Show more
Only the appropriate connector must be used
Purple connector for black whip antenna
Plug the charger connector into the
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
