Examples of 'metal duct' in a sentence
Meaning of "metal duct"
metal duct - This phrase describes a duct or pipe made of metal, often used for ventilation or heating systems
How to use "metal duct" in a sentence
Basic
Advanced
metal duct
Rounded metal duct length to suit installation.
Do not use plastic or rigid metal duct.
Metal duct subjected to steep temperature gradients.
Use rigid or semi rigid metal duct.
Only rigid metal duct work should be used.
It is recommended that you use a rigid or flexible metal duct.
Mm diameter rigid metal duct recommended.
Use metal duct tape to seal duct joints.
Use screws to attach flexible metal duct to the rigid duct.
The sensor is designed to mount directly to the sheet metal duct.
Only rigid or flexible metal duct should be used for exhausting.
This method is suitable for square or rectangular sheet metal duct types only.
Both rigid and flexible metal duct are shown in the table below.
To reduce the risk of fire, use only metal duct work.
Connect metal duct to ceiling duct and seal with duct tape.
See also
Serious blockage can result if flexible metal duct is bent too sharp.
The flexible metal duct should be straight and smooth and extended as much as possible.
Serious blockage can result if flexible metal duct is bent too sharply.
The flexible metal duct should be straight and smooth and extended us much us possible.
A serious blockage can result if the fl exible metal duct is bent too sharply.
Never install flexible metal duct in walls, ceilings, floors or other enclosed spaces.
Mm diameter UL-listed flexible metal duct if needed.
Do not install flexible metal duct in walls, ceilings, floors or other enclosed spaces.
I warning to reduce the risk of fire, use only metal duct work.
Total length of flexible metal duct should not exceed 8 feet.
Use metal duct tape to make all joints secure and air-tight.
The maximum duct length for rigid metal duct is shown in the table below.
An apparatus according to claim 1, wherein said duct means comprises a metal duct means.
If a flexible metal duct must be used, use the type with a stiff sheet metal wall.
Electrical connection i warning to reduce the risk of fire, use only metal duct work.
Rigid metal duct preferred, semi-rigid optional and allow deductions for elbows and vents.
CAUTION, Do not use plastic or rigid metal duct.
Connect a 6 " round metal duct to the discharge opening so.
Use 4 inch diameter rigid metal duct.
Tf rigid metal duct cannot beused, then UL-listedflexiblemetal.
This field is introduced into enclosure 2 by a wave guide 4, such as a metal duct.
Run 6 ” round metal duct to the outside location.
Use a 4 ” diameter rigid metal duct.
Never install flexible metal duct in walls, ceilings, floors or.
If rigid metal duct can not be used, then UL-listed flexible metal.
The total length of flexible metal duct shall not exceed 2.4m.
Use 7 " round metal duct to connect the discharge collar on the.
Measure, cut, and install flexible metal duct between hood 's.
Connect a 6” round metal duct to the cap and work backwards toward the hood.
Cut a length of flexible metal duct ( extended ) to this dimension.
Connect a 6 " round metal duct to the cap and work backwards towards the hood.
Cut a length of 6 " round metal duct 6 " shorter than this dimension.
Use 6 " round metal duct to connect the.
Fig.22 Attaching the metal duct to the dryer outlet.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Duct
Show more
Change duct size gradually to minimize turbulence
Durable rotomolded duct rings and housing
Duct supports are recommended to support weight of cabinet
