Examples of 'metal edges' in a sentence
Meaning of "metal edges"
metal edges: Refers to the sharp or defined borders made of metal, often found on objects like knives, tools, or furniture
How to use "metal edges" in a sentence
Basic
Advanced
metal edges
It has metal edges along the path.
Avoid contact with punched metal edges.
Corrugating of metal edges to reduce diameter or facilitate bending.
May or may not have metal edges.
Some metal edges and the fi ns on the heat exchanger are.
Do not touch any metal edges.
All metal edges should be rolled or have rounded capping.
There is a danger of injury through sharp metal edges.
Avoid touching the metal edges of the crumb tray.
Use this to run over your metal edges.
The phone has metal edges around the screen.
Injuries can occur when handling sharp metal edges.
Cut metal edges are sharp and may cause serious injury.
Do not touch thin metal edges.
All metal edges used at pipe penetrations must have rounded corners.
See also
Some parts have metal edges.
The metal edges on the coupon then were examined for overhanging coating.
The kind with sharp metal edges on them.
These metal edges are incorporated in the rotor during the moulding process.
Powder coat paint process eliminates sharp metal edges.
Sheet metal edges.
The unit is unpainted and may have sharp metal edges.
You can be hurt by sharp metal edges or can receive an electric shock.
The snow board considered is not necessarily provided with metal edges.
The glassdoors have metal edges and a red horizontal contrast border.
Cookware should not rest on or touch the metal edges of the cooktop.
The glass doors has metal edges and a horisontal red contrast line.
Use caution when handling and cleaning your smoker as some metal edges may be sharp.
Protect the cord from sharp metal edges or strips while shearing metals.
Route all wiring and cabling away from heat sources and sharp metal edges to avoid.
Poorer hoods have unfriendly metal edges which can be tricky to prise open.
In some cases, the operators were requested to balance on narrow metal edges.
Some of the metal edges may be sharp . be careful handling it.
RW uses an electrical current to heat frayed metal edges and seal them together.
Oxidized the metal edges to make it look like a pre-existing structural defect.
I take my time, making sure to not cut myself on any metal edges.
The metal edges of shovels, hoes, rakes or other garden tools may become nicked.
Take care when handling or brushing against all sheet metal edges to avoid personal! njury.
Sharp metal edges can pierce the jacket of the cord, which can be a shock hazard.
There are no low-level hot surfaces or hard metal edges that come with a radiator system.
One disadvantage of many needle shield designs is that they have sharp, exposed metal edges.
Cover lock, thumbhole and metal edges for easy handling and secure document storage.
A gliding surface constituted by a glide soleplate 1 between lateral metal edges 2 and 3 ;.
You can see the metal edges have a slightly different blue hue, which provides a nice contrast.
The guy was thorough. Oxidized the metal edges to make it look like.
No Metal edges to catch a leg or an arm!
CAuTION, fan shutter metal edges are extremely sharp.
Metal edges on at least 90 % of the entire length.
This provides a cover for the metal edges of the end of the Z-post.
Ensure that both metal edges are flush symbol //.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Edges
Show more
Keep cutting edges sharp and clean
Edges when working inside the cabinet
Plastic nozzle edges to prevent damage on surfaces
