Examples of 'metal panel' in a sentence
Meaning of "metal panel"
refers to a flat, rigid surface made of metal. It is commonly used in construction, manufacturing, or as a decorative material. Metal panels are often used as cladding for buildings, interior or exterior walls, roofing, or as part of various metal structures.
How to use "metal panel" in a sentence
Basic
Advanced
metal panel
Lay metal panel on back of custom panel.
The strip is centered on the metal panel.
Replace the metal panel in reverse order.
A clear film is cast on a metal panel.
Some of the metal panel safes are highly decorated.
Remove the metal terminals fixing the metal panel.
On the black sheet metal panel on the back of.
Mounting arrangement for a trailer coupling or a load bearer from a sheet metal panel.
Removing the sheet metal panel on the rear of the.
Return the elements to their initial positions and screw down the metal panel.
Slide the metal panel out of one of the fastening clips.
Painted on a metal panel.
The luminaire driver and wires are installed inside the casing under decorative metal panel.
Remove lower back metal panel unscrew the five attachment screws.
Least two minutes before removing the sheet metal panel on the rear.
See also
The lightweight insulated metal panel cladding also reduced the amount of material required for construction.
Preferably said system is for jointing a first metal panel and a second metal panel.
The Cayenne metal panel is a custom color that was developed specifically for the project.
Method for the production of a metal panel and resulting metal panel.
The socket may include a plate for fastening to a panel, in particular a metal panel.
The deep drawer has a high metal panel on the inside of the rear.
The ultrasonic vibrations are reflected rather than absorbed by a thin metal panel backed with air.
A rusty iron metal panel with a laser-cut text of the house rules hides the staircase.
The coating composition was sprayed onto a primed metal panel coated with a pigmented acrylic lacquer.
The convertible boot, over which the hardtop rests, is a body colored metal panel.
Preferably, the first body is made of a metal panel through a constant bending treatment.
Hey, Larry used his drill to remove a metal panel.
Advanced metal Panel PC's equipped with high brightness TFT panel and touchscreen.
System for connecting a bending blade to its corresponding support in a sheet metal panel bending machine.
Metal panel and non-metallic panel two.
The preventive effect is particularly prominent when the metal panel thickness is under 1 mm.
Category, metal panel and non-metal panel two.
A beryllium copper electrical gasket used to bond metal panel members on doors, sills or covers.
Fig 1 illustrates a metal panel 1 and an insulating panel 2 deposited on a concrete support 4.
The user depresses the calibrate-radius length buttons and inserts the metal panel into the curver.
A method of making a metal panel assembly, the method comprising,.
This assembly, Ford says, could be concealed by a small metal panel in the roof.
After formation, Composition 3 is applied to a metal panel that includes an electrocoat layer.
They don't even make the panels meet up tight in the corners! It's a metal panel.
After formation, Composition 5 is applied to a metal panel that has an electrocoat layer applied.
Logo, Silkscreen logo, woven logo, heat transfer logo, rubber logo, metal panel logo.
Hey, Larry used his drill to remove a metal panel on top of the subway.
Remove the two filter clips B ( fig . 6 ) and the acrylic or metal panel C.
DRIPSTOP is self-adhesive and is applied to the metal panel in the profi ling process.
Hey, Larry used his drill to remove a metal panel Oh, no.
The assembly was then laminated to a DCT 5002 metal panel to create a good seal.
Once the frame is in place, simply insert the metal panel and you are done!
The fasteners 60 are then pressed into the sheet metal panel as press 2 closes.
It looks gorgeous, with angular black plastic, framing a metal panel in gold, silver, or titanium.
At the same time, the pierce nut 20 is attached to the metal panel 10 by clinching.
You'll also be interested in:
Examples of using Panel
Show more
Center the panel on the freezer door
Panel discussion on agriculture and rural development
Replace the panel by reversing this step
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
