Examples of 'metal shaft' in a sentence
Meaning of "metal shaft"
A metal shaft is a long, slender, and cylindrical piece made of metal. This phrase is often used to describe a structural component or part of a machine or tool that provides support, strength, or rotational capabilities. Metal shafts are commonly found in various applications, including engines, gears, axles, and industrial equipment
How to use "metal shaft" in a sentence
Basic
Advanced
metal shaft
The metal shaft is deformed under load.
The cylinder can be solid or comprised of a shell traversed by a metal shaft.
The bottom of the metal shaft is of minimum thickness.
Secure the feed tube on the meat grinder and place a metal shaft inside.
Push the metal shaft through the bracket housing of the left arm.
It is mounted on a metal shaft.
The metal shaft and magnetic impeller assembly should be soaked side by side.
These discs can be assembled on a metal shaft and compressed into roller form.
The metal shaft is made of non-magnetic metallic material.
Firmly press the brush head down on the metal shaft until it stops.
The metal shaft 2 is supported and may be internally cooled all by means not shown.
Remove the brush head and rinse the metal shaft area with warm.
NOTE, The metal shaft and housing will only rotate in one direction.
Firmly press the brush head down onto the metal shaft until it stops.
A length of the porous metal shaft is exposed beyond the surface 28 and porous metal coating 57.
See also
The cured synthetic sticks very well to the metal shaft 1.
This may be a hollow plastic, wood or metal shaft provided in various materials and colors.
Furthermore, it is strengthened with nine fiberglass ribs and black metal shaft.
The rotating anode 6 is carried by a metal shaft 7 which is rigidly fixed to a rotor 8.
These are placed in a common plane, in the circumferential direction of the metal shaft.
The L-bolt is a hard metal shaft bent to form the right-angle leg.
Furthermore, the covering can be directly formed on the outer periphery of the metal shaft.
Firmly press the brush head down onto the metal shaft until it stops Fig . 3.
The second group of conductors ( 9 ) is arranged substantially along the bottom of the metal shaft.
Remove the brush head and rinse the metal shaft area with warm water Fig . 11.
The reinforcing shaft 26 is preferably a metal shaft.
Hold the metal shaft and rotate the lower housing 180 as shown in figure J.
As mentioned above, the shuttle may have a metal shaft lying on its axis.
The first metal shaft 106 has a hollow lower end side.
Toothbrush handle 1 Remove the brush head and rinse the metal shaft with warm water.
The metal shaft has a low relative magnetic permeability of approximately 40 to approximately 500.
In this form, he is armed with the Metal Shaft.
Hold the metal shaft and rotate the lower housing 180 as shown in part 2.
The torsion bar 320 can be replaced by a less compliant metal shaft member.
Also other shapes than a cylinder 2 can be made in the above-described manner around a metal shaft 1.
The vertical branches 19 include a cylindrical carcass 20 of plastics material molded around a metal shaft ( not shown ).
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
