Examples of 'metal to metal' in a sentence
Meaning of "metal to metal"
This phrase is often used to describe a situation or action that involves direct contact or collision between two or more metal objects. It emphasizes the physical interaction or connection between metallic surfaces, often relating to mechanical or engineering contexts, such as machinery, construction, or automotive applications
How to use "metal to metal" in a sentence
Basic
Advanced
metal to metal
It avoids metal to metal contact at full extension.
Both sets of brake are metal to metal.
The joining of metal to metal with a disk washer.
The distribution varies from metal to metal.
The use of metal to metal sealing is not permitted.
The seal is typically metal to metal.
No metal to metal contact is ever allowed.
That there is a smooth metal to metal contact.
Metal to metal adhesives other than for stationery or household use.
Primarily for metal to metal applications.
Metal to metal adhesion.
Once you have metal to metal contact happening.
Metal to metal contact occurs between rolling elements and raceways.
It needs to be metal to metal.
A metal to metal seal can then be effected by applying tubing pressure.
See also
Prevent any seam areas having solely metal to metal contact.
Works on metal to metal contact.
Below the width normally encountered in metal to metal valve seats.
Are metal to metal.
The ground connection must be made with solid metal to metal connections.
The hitch must have solid metal to metal contact with the vehicle attachment points.
Hydrogen sulphide in the hot gas reacts with the metal to metal sulphides.
This AT will vary from metal to metal and with the deposition technique used.
But how do you properly attach metal to metal?
As may be seen, metal to metal contact is minimized to reduce heat loss.
In the gas phase, some backward reaction of metal to metal chloride occurs.
In addition, the metal to metal contact assures the formation of electrical continuity.
Pins tend to wear less because the metal to metal contact is minimized.
Moreover, the ease to which catalyst metals can be deactivated differs from metal to metal.
The plastic bushings substantially prevent metal to metal scraping noises being generated.
Intimate metal to metal contact is thereby provided between the wire and the terminal portions 20.
The threaded portion 28 also gives good electrically conducting metal to metal contact.
Further more, to prevent the metal to metal final contact a rubber cushion is still mandatory.
The detonator is inside . It needs to be metal to metal.
Shut-offs create metal to metal contact which can cause increased cost and decreased mold life.
Alternately, recharging circuit 12 may be an induction recharger, not requiring metal to metal contact.
It 's metal to metal only.
A, Actually, the operation of plain bearings does not involve metal to metal contact!!
Intimate metal to metal contact is thereby provided between the wires 14 and the terminal portions 20.
Footnote * reads as follows, " The use of metal to metal sealing is not permitted.
A control consisted of a test with no superabsorbent polymer or lubricant ( s ), i.e., metal to metal.
ASTM D3166 specifies fatigue testing methods for metal to metal adhesive joints.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
