Examples of 'metal vent' in a sentence
Meaning of "metal vent"
metal vent: A structure designed to allow the escape or release of air, gas, or other substances. Typically made of metal and used in various systems to control airflow
How to use "metal vent" in a sentence
Basic
Advanced
metal vent
We do not recommend using a flexible metal vent.
Cm round metal vent system.
Do not kink or crush flexible metal vent.
Cm round metal vent duct.
When using only one type of metal vent.
Flexible metal vent is not recommended.
Replace with heavy metal or flexible metal vent.
Mm heavy metal vent and clamps must be used.
Rigid metal or flexible metal vent.
Use only approved metal vent ducting material.
Rigid metal vent is recommended to prevent crushing and kinking.
Use rigid or stiff walled flexible metal vent material.
Rigid metal vent is recommended to avoid crushing and kinking.
When using a combination of rigid and flexible metal vent.
Always install a metal vent cover where the ductwork exits the house.
See also
Standard exhaust installation with rigid metal or flexible metal vent.
Cm round metal vent transi-tion with damper supplied.
Replace any plastic or metal foil vent with rigid metal or flexible metal vent.
B - vertical vents using metal vent pipe - commercial and residential installations.
Determine the length of the fully extended flexible metal vent you will use.
Is a single-wall metal vent connector permitted to be used for this application?
Replace any vinyl or metallized plastic foil vent with rigid metal or flexible metal vent.
See its concrete base and those metal vent tubes? How do you.
Attach 6 " metal vent duct to the hood duct connector.
Fire Hazard Use a heavy metal vent.
Note, Flexible metal vent is Not recommended.
Used rigid or stiff-walled flexible metal vent material.
Do not install flexible metal vent in enclosed walls, ceilings, or floors.
Use rigid or stiff - walled fl exible metal vent material.
Cm dia . round metal vent duct-length required is determined by ceiling height.
See its concrete base and those metal vent tubes?
Rigid metal or flexible metal vent 7, Vent length necessary to connect elbows 8.
The installer would like to use a single-wall metal vent connector.
Number of 90 Rigid metal vent Flexible metal vent turns or elbows.
CAPTAIN AMERICA, How do you … See its concrete base and those metal vent tubes?
Maximum length of 4 " diameter metal vent.
You'll also be interested in:
Examples of using Vent
Show more
Plastic or metal foil vent is not recommended
Clear vent area of dust and debris
Leave the bottom vent slightly open
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
