Examples of 'metal-to-metal' in a sentence
Meaning of "metal-to-metal"
Metal-to-metal can refer to a type of bonding where two metal surfaces are in direct contact with each other, often used in metalworking and welding
Show more definitions
- Designating direct contact between two metal items or elements.
How to use "metal-to-metal" in a sentence
Basic
Advanced
metal-to-metal
The application of a metal-to-metal seal makes it unnecessary to use sealing materials.
An oversized gasket can be used to prevent such metal-to-metal contact if desired.
A metal-to-metal seal on a needle valve is usually used to regulate the flow of liquid.
Compressing two layers of corrugated tubing provides an enhanced metal-to-metal seal.
Use thread lock on all metal-to-metal fasteners to prevent them from vibrating loose.
Preliminary work on a new type of connector ensuring a metal-to-metal seal has been performed.
This type of metal-to-metal connection is easy to produce and has good mechanical strength.
The primary function of engine oil is to minimize metal-to-metal contact reducing friction and wear.
The common material for sliding disc implants is metal in combination with polyethylene or metal-to-metal.
Several seal design alternatives on metal-to-metal seals have been proposed in the prior art.
Zero torque and minimal axial setting load required to energize metal-to-metal annular seals.
The same is also true if metal-to-metal contact is used between a valve member and a seat.
The sealing assembly may include external test capability for metal-to-metal annular seals.
Either collision is usually a substantial metal-to-metal collision that can cause damage and disrupt production.
Friction modifiers are most efficient under boundary conditions or where metal-to-metal contact occurs.
See also
The metal-to-metal lock is resistant to high push out forces and also assures heat transfer.
The separable inductive coupler of the present invention allows electrical power transfer without metal-to-metal contact.
This high radial contact pressure provides a metal-to-metal seal between the gripping sub and the casing.
The contact edges under axial load are then metal-to-metal.
The use of metal-to-metal sealing is not allowed.
The XMCD investigation of the photomagnetic dinuclear complexes confirmed the metal-to-metal electron transfer.
Of the oil caused by metal-to-metal abrasion is regularly.
Lubricated and that contamination of the oil by metal-to-metal abrasion.
Thereby a reliable metal-to-metal seal can be achieved.
The coupler allows electrical power transfer without metal-to-metal contact.
There must be metal-to-metal contact along these joints.
And perfects the imperviousness by metal-to-metal friction.
Seals of the metal-to-metal type generally exhibit better life than toric seals.
Always use threadlock on metal-to-metal fasteners.
Metal-to-metal sealing surface on the exterior / interior peripheral surface of the free terminal part.
It is known to provide a metal-to-metal sealing portion on tubular joints.
A rubber or plastic part used to prevent metal-to-metal contact.
At this stage, the metal-to-metal seal is not in contact with any other part.
Plug made of stainless steel with metal-to-metal seal.
In extreme cases, it can cause metal-to-metal contact between the journal and the bearing.
More preferably, the seats are shouldered into the body by metal-to-metal contact.
In any case, it enables a reliable metal-to-metal connection with the tension member.
This photoresist was later peeled away, leaving the direct metal-to-metal bond.
Clamp work cable with good metal-to-metal contact to workpiece.
There are no physical indications of scuffing, galling, or damage to components indicating a metal-to-metal contact.
Make sure you have a solid metal-to-metal ground connection.
When brazed to metals, duocelan aluminum foam can form an integral metal-to-metal bond.
This engagement results in a metal-to-metal seal along the spiral thread path.
Alternately, the recharging circuit is an induction recharger that does not require metal-to-metal contact.
No electrolytic action, since there is no metal-to-metal contact between connectors and metal pipe.
Anti-wear additives adsorb on metal, and provide a film that reduces metal-to-metal contact.
The lubrication is designed to prevent metal-to-metal contact, between teeth on gears, for example.
Especially under boundary lubrication conditions, a lubricant must act to minimize harmful metal-to-metal contact.
Metal-to-metal contact causes ‘ static ' which can interfere with the correct operation of the receiver.
The given examples of assemblies are solely metal-to-metal assemblies.
