Examples of 'microcracks' in a sentence
Meaning of "microcracks"
microcracks (noun) - tiny fissures or fractures in a material, often invisible to the naked eye, that can affect its structural integrity
Show more definitions
- plural of microcrack
- third-person singular simple present indicative form of microcrack
How to use "microcracks" in a sentence
Basic
Advanced
microcracks
These contractions may be the cause of microcracks.
These microcracks are either superficial cracks or subsurface cracks.
Concentration of a work stress causes occurrence of microcracks.
The occurrence of microcracks is initiated and continues to expand.
It simulates the mechanism of coalescence on the surface of microcracks.
Microcracks could be observed at the surface.
This heterogeneity is conducive to the formation of numerous microcracks.
Microcracks appearing within a few months.
Influence of the casting parameters on the presence of microcracks.
Microcracks form ahead of the advancing fracture line.
This dimensional variation leads to the formation of microcracks.
Some microcracks provoked by a shock can lead to the rupture of.
There is a possibility that some microcracks could have.
These microcracks also allow the localization of electrochemical damage.
And the bitumen will flow into these microcracks.
See also
These microcracks can be quantified by a bendability test at low temperature.
For some materials fracture can be seen as a clustering of microcracks.
Cracks or microcracks in the stone can accelerate this deterioration.
The constituent particles must have surface microdefects or microcracks.
Absence of microcracks and burrs.
All this goes toward limiting the risk of forming microcracks.
It also allows microcracks to be observed by adopting a higher observation pressure.
The cause was attributed to the filling in of voids and microcracks.
The microcracks are believed to absorb stresses caused by thermal shock.
Optically clear titanium oxide coatings were obtained with no microcracks.
These microcracks are intercepted and deflected by tiny particles of hydrated lime.
The rapid propagation of these microcracks caused the specimens to break.
Microcracks and microfractures.
Its main application is to avoid the propagation of microcracks from a surface.
Microcracks may constitute a problem since they may be difficult to detect.
The porous carbon structure may be produced substantially free of microcracks.
Such microcracks are found in both natural latex and synthetic elastomers.
Diffusion experiments depend on these microcracks abundance and the microstructural evolution.
Microcracks are developed by distortion introduced during working and observed as fine cracks.
Stains and debris accumulate on these microcracks and are not easy to remove.
The absence of microcracks imparts a high elasticity to the spring up to high temperatures.
Healing of microcracks.
Said microcracks must be generated between the particles and an enamelled surface.
A mould that is too cold can lead to microcracks in the foam sheet.
Intergranular microcracks between the welding bead and the base metal.
Macrocracks do not impair the whiteness of a pavement marking material as much as microcracks.
These bonds can break creating microcracks and finally failure of the material.
Such microcracks aggravate the hysteresis characteristic and lower the sensitivity of sensors.
The abovementioned penetration is then caused by the negative pressure established in the microcracks.
Optically clear coatings free of microcracks were produced without thermal damage to the substrate.
Impairment of the skin barrier may also promote the appearance of microchapping or microcracks.
This time the optical microscopy showed small microcracks on the sample surface.
The first microcracks begin much later and the stress levels at break are increased.
The picture shows that the plated contact área is free from microcracks.
Many internal micro defects and microcracks exist even before any loading is applied.
