Examples of 'micrometer' in a sentence
Meaning of "micrometer"
A 'micrometer' is a device used for precise measurement, especially in engineering and machining
Show more definitions
- A device used to measure distance very precisely but within a limited range, especially depth, thickness, and diameter.
- US spelling of micrometre
How to use "micrometer" in a sentence
Basic
Advanced
micrometer
The micrometer indicator should read zero.
A network of fibres in the micrometer range is obtained.
Optical micrometer for large measurement objects.
Do not use the double seam micrometer.
Electrical micrometer or lever type dial gauge.
One of your boys borrowed my laser micrometer.
Use an inside micrometer to measure the inside.
This critical radius is around a tenth of a micrometer.
A calibrated lens micrometer is used by a blinded observer.
Eye operations need to be precise to the micrometer.
A micrometer may herein also be referred to as a micron.
The purple ball is one micrometer in size.
An arbitrary micrometer value indicated by a filter manufacturer.
Its dimensions vary from nano to micrometer.
A calibrated lens micrometer was used by a blinded observer.
See also
Is taken on each of the two micrometer heads.
An arbitrary micrometer value indicated by filter manufacturers.
Longitudinal measurement are obtained with a digital micrometer.
The initial micrometer reading is then recorded.
The thickness of the films was measured by micrometer.
Virtual micrometer in millimeter with hundredths resolution.
Preferably an opening of at least ten micrometer is used.
A micrometer allows a measurement of the size of a body.
The bacterial zones were measured with a micrometer.
An optical micrometer is used to calibrate the system.
The figure below shown an inside micrometer.
Align the stage micrometer and the graticule.
Longitudinal measurement is obtained with a digital micrometer.
Micrometer screws for optical instruments.
Value of one micrometer screw revolution.
Micrometer screw for setting the magic angle.
Make sure the micrometer is zeroed.
A micrometer is used to adjust and calibrate the system.
And a mesostasis phase which contained micrometer crystals.
Keep the micrometer clean and accurately adjusted.
Usually they must be larger than one micrometer.
The micrometer is closed too rapidly.
There is nothing particularly special about this micrometer.
An arbitrary micrometer value indicated by the filter manufacturer.
Development of a minimanipulator for micrometer movements.
A micrometer was used for these measurements.
With divining rod and micrometer.
A calibrated ocular micrometer was used to measure suture diameter.
Check for damage to the outside of the micrometer.
An inside micrometer or vernier bore gauge measures a bore directly.
There are three main types of micrometer.
A thousandth of a micrometer is called a nanometer.
The positioning precision can be less than a micrometer.
Tubes are checked with a laser micrometer for dimensional accuracy.
Outside diameter was measured by an ocular micrometer.
