Examples of 'microphone signals' in a sentence
Meaning of "microphone signals"
Microphone signals refer to the electrical signals generated by microphones when they capture sound. These signals can vary in amplitude and frequency, and are typically used in audio recording and communication systems
How to use "microphone signals" in a sentence
Basic
Advanced
microphone signals
Then add the other microphone signals.
The microphone signals can be voltages.
Setting the mixing ratio of the microphone signals.
The individual microphone signals are routed to separate tracks.
The DirAC analysis takes multiple microphone signals as input.
The segmental microphone signals feature specific characteristics.
For each time and frequency obtain one or more reference microphone signals.
For transmitting the microphone signals to the receiver.
These microphone signals may also be determined artificially by simulated virtual recordings.
The intention of the arrangement is to attenuate exceptionally strong microphone signals before transmission.
The processing of the microphone signals is identical to that previously described.
Further embodiments relate to a method for deriving a directional information from a plurality of microphone signals.
Transform multiple microphone signals into the time frequency domain.
Calculate one or more sound directions per time and frequency from the multiple microphone signals.
The plurality of microphone signals may describe the sound field.
See also
Finally, the echo estimate is subtracted from the microphone signals.
These different sets of microphone signals are never mixed with each other.
It also receives information about the frequencies of the microphone signals of terminal 106.
The microphone signals are connected via the XLR-socket.
In order to prevent this effect, the microphone signals are band passed.
The microphone signals are further amplified and detected using lock-in amplifiers.
The transmission of none synchronized microphone signals is not supported by the DMI-2 portable.
The microphone signals are each sampled with 40 kHz after amplitude demodulation of the received signal.
To set the mixing ratio of the two microphone signals see chapter 4.3.
If microphone signals are being received, the RF-LEDs are illuminated.
The index p denotes the individual microphone signals and ranges from 0 to P-1.
These microphone signals are affected by the environment of the terminal 400.
Thus, the first detection signal includes 10 or 20 or more individual microphone signals.
To evaluate the noise levels, microphone signals were processed with the damas2 algorithm.
This provides a 30-dB gain boost, thereby optimizing the input for microphone signals.
In analysis, the microphone signals are written as follows,.
If microphone signals are being received, the RF-LED is illuminated.
However, the original microphone signals ( mici ( t ) ) are often not available.
The individual microphone signals output by the individual microphones 100 form the first acquisition signal.
Mix the microphone signals with the controls MIC 1 - 4 or fade them in and out.
You'll also be interested in:
Examples of using Microphone
Show more
Point the microphone towards your face
Press the button to switch the microphone on
The microphone position can be adjusted by sliding
Examples of using Signals
Show more
Output signals common to measuring technology are available
Hilarious shirt that signals we drink alcohol
Signals an important instruction related to the pump
