Examples of 'minimum clearance' in a sentence
Meaning of "minimum clearance"
minimum clearance: This phrase refers to the least amount of space or distance required for safe passage or operation. It is often used in construction, aviation, and military contexts to indicate the minimum acceptable distance or level of access
How to use "minimum clearance" in a sentence
Basic
Advanced
minimum clearance
Cm minimum clearance between top of cooktop.
Given dimensions provide minimum clearance with oven.
Minimum clearance to a vertical right or left side.
Given dimensions provide minimum clearance.
Minimum clearance to combustible con struc tion is.
Dimensions shown are the recommended minimum clearance allowances.
Cm minimum clearance for door opening.
Given dimensions provide minimum clearance for the oven.
Minimum clearance to enclosure combustibles and mantel.
The following illustrations show minimum clearance dimensions for proper.
Minimum clearance from any combustible materials.
This appliance is designed to be free standing or recessed with a minimum clearance.
Mark the minimum clearance on the centre line.
For adequate inspection and servicing the following minimum clearance is necessary.
Minimum clearance from noncombustible construction.
See also
Noncombustible material within the minimum clearance area could result in discoloration or deterioration.
Minimum clearance to a vertical right or left side wall is.
Potential need for more than minimum clearance while operating the hardtop.
Cm minimum clearance from upper cabinet to countertop.
Preferably the back does not require a minimum clearance between the back and an external surface.
Cm minimum clearance between back wall and.
B3 maintain the following minimum clearance dimensions.
For minimum clearance to top of range.
However, in practice a minimum clearance is observed.
The minimum clearance is five metres.
Use non-combustible strapping to maintain the minimum clearance to combustibles.
To ensure minimum clearance dimensions exist.
Any items which are to be vacuumed under should have a minimum clearance of 90 mm.
Minimum clearance from sides and back of unit to.
Preparing the opening 1 maintain the following minimum clearance dimensions.
Minimum clearance on either side of range.
Side-to-side clearance is to be the same as minimum clearance to vinyl inside corners.
Cm minimum clearance between back waft and countertop.
Prior to installation, check to ensure that all minimum clearance requirements are met.
Minimum clearance between piles.
To permit the required convection, a minimum clearance to the adjacent components must be observed.
Minimum clearance to combustible surfaces and for air openings are.
Therefore, there is no more minimum clearance between the platform and the groove.
Minimum clearance between washer and adjacent walls or other surfaces.
Accordingly, the dryer is above its minimum clearance over the steam separator.
Minimum clearance to combusibles must be maintained or a serious fi re hazard could result.
Always maintain proper clearance from combustible materials . minimum clearance from combustibles.
There is no minimum clearance value but only a recommended value.
If using a hearth, adjust the rough opening size as necessary to maintain minimum clearance requirements.
Maintain minimum clearance from normal combustible material like paper.
The indoor unit should be installed allowing a minimum clearance of 15cm from the ceiling.
Minimum clearance from combustible surface centered above the cooktop.
Select a wall with a flat, regular surface and minimum clearance to accommodate your interactive whiteboard system.
Minimum clearance gauge.
Side Clearance - Grills installed near a side wall must allow a minimum clearance of 8.
You'll also be interested in:
Examples of using Minimum
Show more
Size expressed as minimum and maximum weight
Minimum horizontal angles of light distribution in space
The pension based on minimum earnings is maintained
Examples of using Clearance
Show more
Clearance of the annual report on technical cooperation
I got special clearance through gate four
Clearance from countertop to unprotected overhead surface
