Examples of 'minimum thickness' in a sentence
Meaning of "minimum thickness"
minimum thickness: This term denotes the smallest measurement of thickness considered acceptable or required for a particular material or object
How to use "minimum thickness" in a sentence
Basic
Advanced
minimum thickness
Body material and its minimum thickness in mm.
Minimum thickness requirements for metal IBCs.
A solum does not have a maximum or a minimum thickness.
Minimum thickness at any point of the profile.
Running treetops to a minimum thickness is also reduced considerably.
Minimum thickness of the ground parts of a plate.
High insulation with minimum thickness.
Minimum thickness for each capacity range.
The bottom of the metal shaft is of minimum thickness.
Wishing a minimum thickness we think of a better inertia.
Moreover the torsional stresses make necessary to keep a minimum thickness.
Minimum thickness of the coating on centrifuged samples.
Back plate minimum thickness.
The minimum thickness of each package shall be at least.
Controlled minimum thickness.
See also
Minimum thickness of the test piece in mm.
It must also have a specific minimum thickness in order to be sufficiently effective.
Minimum thickness of tank walls.
Such portions will not fulfill the minimum thickness criteria.
Is the minimum thickness of said layer.
Rough and irregular surfaces make it difficult to achieve minimum thickness.
The minimum thickness of a portable tank should be the higher of.
Reduce the anatomical shape and observe the stipulated minimum thickness.
Minimum thickness of insulation between stove and combustible materials.
Your brake discs should be replaced when they reach minimum thickness.
Minimum thickness is stamped on the inner hub of the disc.
The slicing stage then consists in defining a minimum thickness of print layer.
E minimum thickness of the shell in mm.
The four narrow portions all have the same minimum thickness.
Minimum thickness wear limit.
These considerations limit the minimum thickness a conventional cantilever arm can be made.
Minimum thickness of original material above belt after buffing.
The greater value produced by the formulae shall be taken as the minimum thickness.
The minimum thickness of the sample under compression is measured.
This mixture is then applied to the subfloor with a minimum thickness of three centimeters.
Achieving minimum thickness depends on the state of the art.
That the deformation caused is less than the minimum thickness of the sample.
Minimum thickness of shells.
The characteristics of the studs are therefore determined to provide a uniform film of minimum thickness.
Minimum thickness of the test piece or of the surface layer to be tested.
Check disc wear by measuring minimum thickness at different points of the disc with a micrometer.
Minimum thickness of steel mm.
The big problem of making a minimum thickness as terminal to see where the battery gets.
Minimum thickness of shell.
To have adequate rigidity with the metal stencil a minimum thickness of the stencil is required.
Minimum thickness of slabs.
These were respectively taken as the maximum thickness and the minimum thickness of each layer.
Minimum thickness measured after forming and polishing shall be informed.
The structure may have variable thickness ranging from a maximum thickness to a minimum thickness.
Minimum thickness allowing thinner design with superior thermal performance.
You'll also be interested in:
Examples of using Minimum
Show more
Size expressed as minimum and maximum weight
Minimum horizontal angles of light distribution in space
The pension based on minimum earnings is maintained
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
