Examples of 'minimum wall' in a sentence
Meaning of "minimum wall"
Minimum wall: In architecture or construction, minimum wall refers to the thinnest allowable partition or dividing structure that meets building code requirements. This term is used to specify the minimum thickness or dimensions necessary for a wall to provide structural support and meet safety standards
How to use "minimum wall" in a sentence
Basic
Advanced
minimum wall
Minimum wall thickness for metal IBCs.
Locally limited shortfalls in minimum wall thickness.
Minimum wall thickness of steel drums.
Derivation of an adequate equivalent minimum wall thickness formula.
Minimum wall thickness should follow the table below.
Determination of minimum wall thicknesses.
These minimum wall thicknesses were listed in a table in the aforementioned paragraph.
We recommend the following table as the minimum wall thickness.
Absolute minimum wall thickness.
The second minimum exterior width occurs at a location corresponding with the second minimum wall thickness.
Shortfall in the minimum wall thickness over a large surface.
SDR is equal to the outside diameter divided by the minimum wall thickness.
True minimum wall measurement.
The SIDR is equal to the average internal diameter divided by the minimum wall thickness.
Lower figures concerning minimum wall thicknesses if austenitic steels are used.
See also
Minimum wall thicknessa.
The other requirements as regards minimum wall thicknesses remain unaffected.
The minimum wall thickness to withstand pressure shall be calculated in particular with regard to.
Derivation of an adequate equivalence minimum wall thickness formula alternative formula.
The minimum wall thickness is controlled by the mechanical strength needed of the tube.
The infusion cannula must have a minimum wall thickness to maintain minimum stiffness.
The minimum wall thickness of the tank circumferential wall can consequently be kept advantageously low.
The first latex dip determines the minimum wall thickness of the glove fingers.
Minimum wall thickness particular design aspects 3mm.
Higher figures concerning minimum wall thicknesses if common aluminium alloys are used.
Minimum wall thickness,.
Pressure drums shall have a minimum wall thickness as specified by the competent authority.
If “ push-in ” fittings are used, then the manufacturer generally specifies a minimum wall thickness.
Shortfalls in the minimum wall thickness caused by corrosion during operation.
Technical justification concerning document 2000/1 on adequate equivalent minimum wall thickness formula.
Materiel Minimum wall thickness.
How should storage containers for additives be constructed ( material, minimum wall thickness, shape, weldability )?
Therefore, absolute minimum wall thicknesses for different materials should be fixed.
We therefore propose introducing requirements for the minimum wall thickness of those tanks, as follows.
A uniform minimum wall thickness ensures a high level of stabil - ity in the copings.
What is the recommended minimum wall thickness?
Table 3 Minimum wall thickness of metal IBCs.
Paragraph 18 refers to minimum wall thicknesses.
Minimum wall thickness The existing piping should have a design pressure of 3.3 MPa.
Verification of the minimum wall thickness ;.
Minimum Wall Thickness ( Supported and Unsupported ), Wall thickness in geometries is limited by resin resolution.
In areas such as corners, a minimum wall thickness of one millimeter is commonly needed.
Minimum wall thickness stemmed elements 0.8mm with support.
In areas such as corners, a minimum wall thickness of one millimetre is commonly needed.
Minimum wall thickness shall not be reduced locally by more than 10 % ;.
Thus, the proposed adequate equivalence minimum wall thickness formula can be derived.
The minimum wall thickness to get a flexible part is 0.6 mm.
According to the table, the minimum wall thickness for steels was 3 mm.
The minimum wall thicknesses T7 for the regions 82 and 84 can be the same or different.
Each shaped region 82 and 84 possesses a minimum wall thickness designed T7 in Fig.
You'll also be interested in:
Examples of using Wall
Show more
Our wall has not fallen down
Identify an appropriate wall to fix the machine to
Wall mounting the rear speaker system
Examples of using Minimum
Show more
Size expressed as minimum and maximum weight
Minimum horizontal angles of light distribution in space
The pension based on minimum earnings is maintained
