Examples of 'ml flask' in a sentence
Meaning of "ml flask"
A ML flask refers to the Flask web framework in Python that is commonly used in machine learning applications to build and deploy machine learning models as web APIs. It provides a simple and flexible way to serve predictions using trained ML models
How to use "ml flask" in a sentence
Basic
Advanced
ml flask
Ml flask fitted with a reflux condenser with ground-glass joints.
The following materials were introduced into an 8 ml flask fitted with a VitonRTM dividing membrane,.
A 25 ml flask is suitable for the culture of the samples.
Are introduced into a 50 ml flask equipped with a condenser.
An accurately weighed sample of about 5 g of rectified concentrated must is placed in a 50 ml flask.
It is distributed into 10 ml flask which are closed.
The cells are carefully recovered from the cell ring, in a 15 ml flask.
The slurry was transferred to a 250 mL flask connected to a rotovap.
All impinger and fishtail washes are mixed together in the 250 mL flask.
The mixture was placed in a 500 mL flask under a nitrogen atmosphere.
Ml flask was fitted with a mechanical stirrer, a thermometer, a dropping funnel, and a reflux condenser.
The slurry was transferred to a 250 mL flask connected to an inline glass frit.
The red clear solution is filtered through Celite into a nitrogen-inertized 25 ml flask.
The experiments were carried out using 100 mL flask culture supernatants.
Place the 500 ml flask with the mixed acid an phenol in the ice bath.
See also
The first culture is transferred to a 250 ml flask of sterile skimmed milk.
Apparatus used, 50 ml flask with magnetic agitation surmounted with a reflux condenser and a dropping funnel.
A nitrogen hose was connected to the 500 ml flask containing the ethylene diamine.
Ml of each of the above 2 solutions are added to a 20 ml flask.
Return a filtrate to a clean 500 ml flask with agitator and with vacuum capability.
Recover the eluate in a previously weighed 250 ml flask.
The reaction was carried out in a 250 ml flask with mechanical stirring under nitrogen atmosphere.
Ml of corrosion-inhibiting formulation to be tested are placed in a 100 ml flask.
The reactor tube was connected to the top of a 1000 ml flask with a surrounding heating mantle.
Mg of tungstic acid ( monohydrate ) and 3 g of water were added to a 50 ml flask.
Transfer to a 250 ml flask and make to volume with water.
The combined filtrate and washes are transferred to a 500 ml flask with a toluene rinse.
Into a 250 ml flask place a sample containing about 1 g of starch.
The solution prepared above was placed in a 500 ml flask.
A round bottom 250 ml flask was fitted with a mechanical stirrer.
The contents were then transferred into a 500 ml flask.
The 100 ml flask was rinsed with a small amount of heptane.
This second solution is added to the contents of the 500 ml flask.
Transfer the contents of the 250 mL flask to the addition funnel.
Mole of acetylenic compound and 0.03 mole of tetrabutylammonium dihydrogenotrifluoride are placed in a 50 ml flask.
Loop of the previous culture is inoculated into a 50 mL flask containing 20 mL of medium 4.
Twenty grams of the title compound was combined with 40 ml of ethanol in a 60 ml flask.
The filter cake was placed in 100 mL flask cooled in an ice-water bath.
The eluate ( containing nonpolar compounds ) was collected in the 250 ml flask.
This crude liquid was poured into a 2000 mL flask and cooled in an ice bath.
The solution was filtered with filter paper into two 100 ml flask.
The collected solids were placed into a 500 mL flask cooled in an ice-water bath.
About 25 ml of anhydrous methanol was added and the mixture was transferred to a 100 mL flask.
A two-neck 500 ml flask equipped with a stirring bar, argon purge, and a rubber septum was used.
The sample side is injected with 2 µL of water per 300 ml flask volume.
To the empty 100 mL flask was charged 5 mL of the IDA solution.
The granules were removed and charged back into the 1000 ml flask.
Preparation of ANMPE In a 250 ml flask provided with stirrer, thermometer, dropping system were introduced,.
Ethyl thiooxamate and 10 mL THF are introduced in a 25 mL flask.
The bacteria were inoculated in the 100 ml flask with Luria medium.
You'll also be interested in:
Examples of using Flask
Show more
He took a kind of flask out of his pocket
The flask is actually filled with oxygen
I told you that flask was not mine
Examples of using Ml
Show more
One ml of saliva carries more germs than
Your doctor will prescribe the dose in ml
Six to eight ml of hydrogen peroxide will be necessary
