Examples of 'ml of isopropyl' in a sentence
Meaning of "ml of isopropyl"
Ml of isopropyl: This phrase indicates the quantity or amount of isopropyl. "Ml" is an abbreviation for milliliter, which is a unit of volume measurement. It is commonly used to specify the volume of liquid substances.
How to use "ml of isopropyl" in a sentence
Basic
Advanced
ml of isopropyl
Ml of isopropyl palmitate are added to the suspension obtained above.
The oil was dissolved in 8 mL of isopropyl acetate at reflux.
Ml of isopropyl ether were then added.
The mixture was wet granulated using 5 ml of isopropyl alcohol.
To the residue was added 40 ml of isopropyl ether and the crystals began to precipitate.
The dropping funnel was rinsed with 5 ml of isopropyl acetate.
G of dodecylamine dissolved in 500 ml of isopropyl alcohol are introduced into a 1-liter round-bottomed flask.
Then the solution was quenched with 2 ml of isopropyl alcohol.
The residue was mixed with 25 mL of isopropyl acetate and then concentrated in vacuo.
The product started precipitating after the addition of about 5 ml of isopropyl alcohol.
To the clear filtrate 15 ml of isopropyl alcohol was added dropwise.
Aqueous phase was removed and precipitated using 0.5 ml of isopropyl alcohol.
To the residue were added 50 ml of isopropyl acetate, and water separated was removed.
The crystallization is completed by adding 150 ml of isopropyl alcohol.
After reacting for an hour, 50 ml of isopropyl ether to precipitate.
See also
The combined mixture is hydrolyzed with 150 ml of 1N hydrochloric acid and 20 ml of isopropyl ether.
Recrystallization, with decolorization, from 9 ml of isopropyl alcohol produced the title compound.
An oil is obtained which is recrystallized from 130 ml of isopropyl ether.
The residue is dissolved in 400 ml of isopropyl alcohol and filtered hot on Norit.
The oil obtained after evaporation is dissolved in 100 ml of isopropyl alcohol.
The residue was then diluted with 28 mL of isopropyl alcohol and reconcentrated to 28 mL.
Ether was evaporated and the residue was taken up with 100 ml of isopropyl ether.
The resulting solution was cooled and 30 ml of isopropyl ether was added thereto.
The combining aqueous layers are extracted twice with 10 ml of isopropyl acetate.
The reaction mixture is taken up in 100 ml of isopropyl ether and 50 ml of water.
A final extraction was carried out with an additional 100 mL of isopropyl acetate.
The residue is pulverized in 200 ml of isopropyl ether at reflux.
The fibers were reslurried with stirring in a beaker containing 400 ml of isopropyl alcohol.
After cooling to room temperature, 10 ml of isopropyl ether was added.
The insolubles are filtered off on a frit and washed with 2 × 20 ml of isopropyl ether.
The residue was added to 20 ml of isopropyl alcohol.
To the resulting oily residue were added 30 ml of isopropyl acetate.
Then a solution of 3.5 ml of triethylamine in 10 ml of isopropyl acetate is added dropwise.
The reaction mixture was extracted with 400 mL of isopropyl acetate.
The residue ( yellow paste ) was treated with 250 ml of isopropyl ether and stirred for 5 minutes.
The reaction mixture is then cooled to 10 ° and quenched with 45 ml of isopropyl alcohol.
The resulting suspension is extracted with 10 mL of isopropyl acetate three times.
The mixture was extracted three times with 80 ml of isopropyl ether.
This solid is taken up in 10 ml of isopropyl ether.
The methanolic solution is precipitated with 1000 ml of isopropyl alcohol.
Take up the residue in 500 ml of isopropyl ether.
The aqueous layer was extracted warm with 100 ml of isopropyl acetate.
The product is extracted with 50 ml of isopropyl acetate.
The mixture is washed twice with 50 ml of isopropyl ether.
The aqueous phase is washed once with 15 ml of isopropyl acetate.
The solids were filtered and washed with 100 ml of isopropyl alcohol.
Acetone was removed by vacuum distillation and then 100 ml of isopropyl acetate were added.
After 5 minutes the mixture became cloudy and another 12 mL of isopropyl ether was added.
The precipitating product is filtered off, washed with 2x10 ml of isopropyl acetate and dried.
Under reduced pressure, the organic solvent is removed and 100 ml of isopropyl acetate are added.
You'll also be interested in:
Examples of using Isopropyl
Show more
Only use isopropyl alcohol and water
Denaturant for ethanol and isopropyl alcohol
Isopropyl alcohol may be used to clean labels
Examples of using Ml
Show more
One ml of saliva carries more germs than
Your doctor will prescribe the dose in ml
Six to eight ml of hydrogen peroxide will be necessary
