Examples of 'ml polypropylene' in a sentence
Meaning of "ml polypropylene"
Ml polypropylene: Refers to milliliters of a type of thermoplastic polymer material called polypropylene, often used in packaging, containers, and other products
How to use "ml polypropylene" in a sentence
Basic
Advanced
ml polypropylene
Ml polypropylene syringes.
The assay was performed in 6 ml polypropylene test tubes.
Ml polypropylene bags with a polypropylene twist-off port fitted with a cap, with a polyester / polypropylene overwrap.
Gels were then filled to the rim of a 1 mL polypropylene vial.
Ml disposable 1 ml polypropylene syringes sealed with rubber tips.
Three sputum samples were aliquoted into tared 15 ml polypropylene tubes as follows.
A 3 ml polypropylene syringe with a silicone O-ring fitted to the plunger.
The substances are placed into contact in a 20 ml polypropylene tube subjected to stirring.
Approximately one gram of leaf tissue from a seedling is lypholyzed overnight in 15 ml polypropylene tubes.
The contact is carried out in a 20 ml polypropylene tube which is placed under stirring.
Four hundred microliters of whole broth were transferred to a disposable 15 ml polypropylene centrifuge tube.
Transfer this suspension to a 15 mL polypropylene centrifuge tube combining all pellets from one blood unit.
Both cell fractions were collected using a pipette and poured into another 50 ml polypropylene centrifuge tube.
The solution was distributed in 2 ml polypropylene monodose vials . Ingredients Components.
Approximately 5 g of this slurry was added to 15 ml polypropylene tube.
See also
Contact is made in a 20 ml polypropylene tube which is shaken.
The cleared supernatants were poured into fresh 15 ml polypropylene tubes.
All this material was pooled into a 100 ml polypropylene container and stirred with a magnetic stirring bar.
The cell pellet was then transferred to a 50 mL polypropylene tube.
Label a 1.5 ml polypropylene tube for each sample.
Ml of cells is aliquoted into a 15 ml polypropylene culture tube.
Approximately 0.1 g of adsorbent was weighed and transferred into a 5 mL polypropylene tube.
Bone marrow aspirates were transferred to 15 ml polypropylene conical tubes using sterile technique.
The medium / cell solution was removed from the flasks and placed into a 50 ml polypropylene tube.
It is stored in a 10 ml polypropylene syringe.
Remove and dilute the supernatant into 1mL of PBS in a siliconized 1.5 mL polypropylene tube.
The loaded device was placed into a wide, 30 ml polypropylene test tube with 6 ml release buffer.
The spore culture was filtered through sterile MIRACLOTH ™ and collected in a 50 ml polypropylene tube.
All procedures were performed in a 10 or 45 mL polypropylene tube fitted with a bottom frit.
These may include a variety of tubes ranging from microtitre wells to 5.0 ml polypropylene test tubes.
Each solution was distributed in 2 ml polypropylene monodose vials ( reference solutions 5 to 8 ).
Tubes were inverted 5 times and the blood was transferred to 15 ml polypropylene conical tubes.
The pack also contains a 30 ml polypropylene measuring cup with 1.0 ml graduations.
One mL portions of PBM 's in medium are placed in 15 mL polypropylene tubes.
The following reagents were mixed in a 0.5 mL polypropylene tube and used in performing PCR,.
In general, the following reagents were mixed in a 0.5 mL polypropylene tube,.
The conjugates were filled in sterile 2 mL polypropylene syringes and stored at 2-8°C.
Approximately 0.1 g of adsorbent was accurately weighed into a 5 mL polypropylene tube.
The hypromellose capsules were placed in 30 ml polypropylene vials with 1g desiccant canisters ( Sorb-it ).
Samples of adsorbent ( approximately 0.1 g ) were accurately weighed into 5 mL polypropylene tubes.
Collect the flow through in a siliconized 1.5 mL polypropylene tube, and re-apply twice.
Each supernatant ( 2.5 ml ) obtained from the above centrifugation is transferred into a 50 ml polypropylene bioassay tube.
These plastic shards are then placed in a 15 mL polypropylene centrifuge tube.
For the deprotection of TBS2-FKpYEEI, the reaction was transferred into a 1.5 mL polypropylene eppendorf tube.
Collect remainder of aqueous phase in clean, dry 30 mL polypropylene bottles for analysis.
Amplifications are typically performed in 100 µL of reaction mix in capped 0.5 mL polypropylene microcentrifuge tubes.
The test is effected in a 125 mL polypropylene flask.
Water and DNA in a volume of 225 µl are combined in a sterile 5 ml polypropylene tube.
Tissue was homogenized and transferred to a sterile, 15 mL polypropylene centrifuge tube.
The suspension is screened and filled into 60 ml polypropylene containers.
You'll also be interested in:
Examples of using Ml
Show more
One ml of saliva carries more germs than
Your doctor will prescribe the dose in ml
Six to eight ml of hydrogen peroxide will be necessary
Examples of using Polypropylene
Show more
Tubes and pipettes of polypropylene or polyethylene are acceptable
Polypropylene bottle with butyl elastomere closure
Belts are made of plastic polypropylene or polyethylene
