Examples of 'mm can' in a sentence
Meaning of "mm can"
This phrase is not a commonly used English expression. Without further context, it is difficult to determine its intended meaning
How to use "mm can" in a sentence
Basic
Advanced
mm can
D in mm can be calculated by the formula.
A tolerance of up to about 5 mm can be accepted for each weld.
What is more, different infill unit thicknesses of up to 66 mm can be used.
Defects from a depth of 1 mm can be detected regardless of its.
Likewise, ropes of a diameter below 3 mm can be used.
Pocket depths greater than 3 mm can also be a sign of gingival hyperplasia.
Accessory arteries with a diameter below 3 mm can be occluded.
Gap widths of 40 mm can be obtained without difficulty.
All accessories with a nominal width of 35 mm can be connected.
A thickness of 0.8 mm can only be used in refrigeration systems that are more powerful.
A screw with a diameter of 6 mm can be used Hole depth.
Braids comprising twelve to fourteen strands having a total thickness of 0.02 mm can be used.
Joints with plate thicknesses up to 25 mm can be either symmetrical or asymmetrical.
For example, glass substrates having a thickness of up to 24 mm can be formed.
The maximum suction level of 3 mm can be reached in manual mode only.
See also
Constituent material or metal having a thickness of only 1 to 5 mm can be used.
A thickness of less than 10 mm can be achieved by these means.
Normally, spherical crystalline silicon with a particle diameter of 1 to 5 mm can be obtained.
Generally, o-ring fragments as small as 2 mm can be identified by detecting equipment.
After removal of the protection cap, a hose with internal diameter of 35 mm can be attached.
An extraction hose with a diameter of 35 mm can be connected to the extraction adapter 15.
Depending on the application, however, a larger fiber having a diameter of approximately 5 mm can be used.
A suction hose with a diameter of 35 mm can be connected to the extraction adapter 9.
By such a route, a total sensor thickness lower than 1 mm can be obtained.
Abrupt movements 5 to 10 mm can render images noisy and virtually uninterpretable.
Unevenness in the wall up to a depth of 25 mm can be compensated for.
A tube thicker than 0.5 mm can equally be used to amplify low frequencies further.
In children, a short axis of 8 mm can be used.
Up to minimum radius of 250 mm can the aluminium profile be bent for every directions.
Adding some margin for error, a minimum stroke 2 mm can be used required.
Spatial resolutions as short as 100 mm can be used, although with decreased strain measurement accuracy.
Instead of the O-ring, a small belt with a width of about 2 mm can be used.
Saw blades with a diameter of 16 mm can be pushed directly onto the shaft.
Screws with a maximum head diameter of 5.5 mm can be used.
Lap joints up to 130 mm can be cut with this tool.
Starting from conventional UV / VIS detectors templates with length of 2 to 25 mm can easily be constructed.
A vacuum hose with a diameter of 35 mm can be connected to the extraction adapter 26.
With a basic depth of 80 mm, infill unit thicknesses of up to 56 mm can be used.
Who knows that 39 mm can make a person wear a big watch?
The capillary tube having a soaking-up height exceeding 25 mm can be used as the inner layer.
Blocks of 600 mm can consequently also pass between the teeth.
Total rainfall amounts of near 50 mm can be expected locally.
Twist drills from 2,5-10 mm can easily be sharpened with the drill bit sharpener see accessories.
Slice thicknesses from thin to approx . 14 mm can be selected continuously.
Thus, a nozzle having a diameter between 1 mm and 10 mm can be used.
Thus, a designed dimension of 90 mm can be used, an increase of about one-third.
More generally, a thickness from 10 microns to 1 mm can be envisaged.
Slots of the order of 0.4 mm can then be produced, for example by laser cutting.
Currently, slice thicknesses as low as 1.0 mm can be obtained.
Thus, a distance of 100 mm can be reached or exceeded between anode and cathode.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using Can
Show more
You can have all the rest
Things that you can barely imagine
Sou can manage the company alone
