Examples of 'mm drill' in a sentence
Meaning of "mm drill"
mm drill - A drill bit specifically designed to create holes with a diameter of one millimeter
How to use "mm drill" in a sentence
Basic
Advanced
mm drill
Mm drill bit for wall cabinet installations.
Drill the points marked with a ø 8 mm drill bit.
Mm drill bit wood or metal ; wall or floor.
Drill the holes in the wall using an 8 mm drill.
Mm drill bit if installing in-line blower motor system.
Pilot drill all the centres using an 8 mm drill.
Use a 2 mm drill and a rotary tool to make the slots according to the drawings.
Drill the two screw holes using a 3 mm drill bit.
Use a 5 mm drill bit to drill the required holes and insert the wall plugs.
Drill holes in the wall at the previously marked points with a 5 mm drill.
Drill the attachment holes with a 6 mm drill and insert one dowel in each hole.
A guide pin was driven into the femur and antegrade drilling is performed with a 6 mm drill.
This revealed that the the 8 mm drill hole was a critical bone gap in this model.
Mm drill bit for • Hand or electric drill wood floors.
Using a Unistrut channel as a template, drill two holes into cab wall with a 5 mm drill.
See also
Finally, a 9 mm drill is used to ream to a depth of 25 mm for both reconstruction tunnels.
Drill the two holes with a 4 mm drill.
Use an Ø5,5 mm drill and make a hole in the flue pipe for the screw.
Bore the holes with a 6 mm drill.
Using a Ø 8 mm drill bit, drill the points marked in this way.
For hard wallboard or double-board construction, use a 6 mm drill bit.
Use a suitable 8 mm drill to drill 60 mm deep holes.
Drill the mounting holes in the saw mounting board using a ø 10 mm drill.
Take the 20 mm drill and drill out a hole.
Drill the holes for the four ultrasound sensors with the enclosed 21 mm drill.
The thread holes using a ø 3.3 mm drill and countersink.
A 4.0 mm drill bit is introduced between the femoral condyles, directly proximally.
Drill the holes using a Ø 5 mm drill bit.
Enlarge the existing ∅ 6.5 mm drill holes for fastening the sunroof to.
Mount the screws according to the distance shown in fig . 2 below . 6 mm drill for plugs.
Place the smooth end of a 6.35 mm drill bit into the notches to align.
Drill a hole of at least 40 mm deep using a Ø 6 mm drill.
Drill the support with a ø 4,5 mm drill bit, using the drilling.
Use a Ø 7 mm drill to create 2 holes in the clamping bracket 29.
Drill the holes using a Ø10 mm drill bit for rawlplugs fig . 6.
Using a drill and an 8 mm drill bit, drill two holes with a minimum depth of 40 mm.
Drill the support with a ø 4,5 mm drill bit, using the drilling template provided.
Is free ; - Using a Ø10 mm drill bit make a hole in the centre of the joint.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using Drill
Show more
Drill holes as indicated in the illustration below
They are gonna drill into the ground
Hand drill or electric drill properly grounded
