Examples of 'mm may' in a sentence
Meaning of "mm may"
mm may - Could be referring to a specific abbreviation or acronym that is context-dependent as it is not a widely recognized phrase
How to use "mm may" in a sentence
Basic
Advanced
mm may
Values over eleven mm may be referred out to a specialist for fixed orthodontics.
Granular boric acids of particle size of about 1 mm may be suitable.
A space of 1 mm may be set between each insulated wire.
Therefore a minimum aperture width of approximately 15 mm may be achieved in this embodiment.
A value of 3 mm may be mentioned as suitable maximum for the average particle diameter.
Testing of sheet of thickness less than 6 mm may be the subject of special agreements.
Most phosphorite grains are sand size although particles greater than 2 mm may be present.
An inner diameter of about 3 mm may be sufficient for this purpose.
Multiunit dosage forms comprising coated cores having a diameter of less than 3 mm may be preferred.
A gap of less than 5 mm may be usable with a smaller jet.
Riding the machine with a brake pad thickness of less than 1 mm may damage the discs.
A slump value exceeding 2 mm may be said not to have enough thixtropy.
Mandibular set-back surgery in Class III cases exceeding three mm may be recommended.
Overbites of about four mm may be corrected, but about fifty per cent may relapse.
On the other hand, one having a thickness larger than 3 mm may be folded with difficulty.
See also
A minimum of 16 mm may be suitable provided the substrate is level.
By way of example, a depth of about 5 mm may be selected.
Spacing larger than 15 mm may be used if the application requires it.
In another embodiment a larger shaft with a diameter of up to 25 mm may be used.
MARKING of less than 5 mm may be marked by painting.
For example, within a bone lumen, a coating thickness of up to 5 mm may be beneficial.
Lenses with focal lengths of 8 to 16 mm may be either rectilinear or fisheye designs.
For example, chopped glass fibers of length 5 mm to 75 mm may be used.
A length of less than 25 mm may be less satisfactory.
Dilation to 6 mm may be required which may necessitate a local 1 % lidocaine block of the cervix.
Workpieces shorter than 60 mm may not be processed.
Above about 125 mM may cause red blood cell interference in the resulting cytograms.
Measurements of between 3 and 5 mm may represent partial tears.
For example, using a photodetector resolution of 10 mm a final resolution of 1.6 mm may be obtained.
For example, bubbles larger than 3 mm may be uncomfortable to some users.
By special agreement, other nominal thicknesses between 0-5 and 1 mm may be arranged.
Typically, an accuracy of 0.1 mm may be obtained for the internal surfaces of the article.
Grid sizes up to values in the region of 100 mm may also be utilised.
The width of less than 30 mm may make bending easier and is less preferable.
DR type electrodes with tip diameters of 6 to 8 mm may be mentioned.
Additionally, EDTA less than 0.5 mM may be present in the reverse transcription reaction mix.
Mm depth, a wall thickness of at least 0.5 mm may be achieved.
The fraction > 10 mm may consist of still partly plastic granules.
A solution of BS3 of approximately 2 mM may in particular be used.
Quartz sand having an equivalent spherical diameter of 0.1 to 2 mm may also be used.
In practice, a value of d=10 mm may be currently considered a minimum.
Thus, for some packages 6 a diameter of more than 15 mm may be acceptable.
For example, a plate thickness of about 2 mm may be used to house a 1 mm diameter wire.
For example, hollow or solid glass balls of a diameter of about 0.2 mm may be used.
For example, a resting membrane diameter of 5.5 mm may be used with a balloon diameter of 6 mm.
However, biocompatible non-thrombogenic jackets having a thickness of up to about 0.75 mm may be used.
Thereafter, instruments ranging in diameter from 5 to 15 mm may be efficaciously introduced therethrough.
A bulk material layer having a thickness in the interval 0.1-5 mm may be distributed.
Perforations of between about 0.2 and about 2.0 mm may be carried out using a mechanical punch.
On this production scale, 186 nozzles with an inlet diameter of maximum 1 mm may be used.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using May
Show more
I may decide to teach you something tomorrow
Of these uses oratory may serve as an illustration
This may be helpful if network problems occur
