Examples of 'modulus values' in a sentence
Meaning of "modulus values"
modulus values - This phrase refers to the numerical factors used in mathematical equations to determine properties like elasticity or consistency
How to use "modulus values" in a sentence
Basic
Advanced
modulus values
Initialization of modulus values and boundary conditions.
This is in agreement with the elastic modulus values obtained.
Other modulus values can be used in such an implant.
This stiffness is inherent in polyester due primarily to its higher modulus values.
The modulus values obtained from all the samples are similar.
Figure 8 presents the stress and elasticity modulus values applied in this study.
The secant modulus values are high in general as compared to the comparative example.
Unfortunately, however, such compositions also normally exhibit low modulus values at low strains.
A table of shear modulus values for common materials is provided in the resources section.
The inventive multilayer films demonstrate excellent tensile strengths, and 1 % secant modulus values.
The specific bending modulus values are erratic and it is difficult to draw clear conclusions.
Multilayer films of the present invention demonstrate excellent tensile strengths, and 1 % secant modulus values.
This correlates with the modulus values of the coated and uncoated elastomeric articles.
Scaffolds containing 10 % honey had significantly higher modulus values compared to 0 % honey.
The viscosity and loss modulus values of the hydrogen absorbing composition are not disclosed therein.
See also
Preferably, the compositions of the invention have tensile modulus values of at least about 1200 Mpa.
In general, storage modulus values increase with increasing molecular weight.
Modulus values of up to about 35 g / d or more are possible.
Typically, high elastic modulus values are preferred for printing.
Flex modulus values ( modulus of elasticity in flexure ) according to Atochem were determined using ASTM D 790.
Both coating hardness and Young 's modulus values were measured using nanoindentation techniques.
Modulus values were 8.9 for polymer A and 5 for comparative polymer CB.
The Young 's modulus and shear modulus values will be adapted to the desired application.
As such, modulus values are higher than those of the precursor SX physical gels.
The hardness, bending strength, and elastic modulus values for Sample No. 1 are from the literature.
While flexural modulus values were decreased somewhat, they are still excellent for most end uses.
THV fluoroplastics typically afford flexural modulus values between about 83 Mpa and about 207 Mpa.
The tensile modulus values ( MPa ) and density values are given in table 3 below.
The flexural strength and flexural modulus values for these samples are listed in Table 12d.
And typically, low modulus values indicate good conformability to a non-planar substrate such as a bottle.
FIG . 4 presents the Young 's modulus values for the three samples.
Further, the relative modulus values for the particular adhesive will be a factor.
FIG . 10 shows the Young 's modulus values for the various samples.
Likewise, the equilibrium modulus values appeared to be positively correlated with silk gel concentration Fig.
Preferred yarns have sonic modulus values which are greater than about 62 g / d.
The elastic modulus values Y are shown in Table 2.
The values 42 include log modulus values for each Doppler filter channel.
Trials 48 and 17 show modulus values 5 times better and much more appropriate elongation values.
The elastic and viscous modulus values are measured at 1 Hz and 2 % deformation.
Fig . 4b shows the modulus values derived from the curves of Fig . 4a.
Table 9 groups together the modulus values at 25 ° C. and the thermal susceptibility index SI.
You'll also be interested in:
Examples of using Modulus
Show more
Modulus division is only defined for integers
Both have the same modulus of elasticity
The modulus of elasticity depends on the temperature
Examples of using Values
Show more
The measured values shall be plotted on a graph
Date and time revert to default values
Carrying values and estimated fair values