Examples of 'mold release' in a sentence
Meaning of "mold release"
mold release: a substance used to prevent things from sticking to molds during the manufacturing process
How to use "mold release" in a sentence
Basic
Advanced
mold release
Usually an external mold release agent is applied.
Mold release agent was applied to a glass plate.
A conventional mold release agent was used.
Mold release compounds for use in concrete fabrication.
The impression is sprayed with silicone mold release.
Mold release was then carried out while hot.
Agent or mold release agent.
A mold release substitute or alternative may also be employed.
The samples molded exhibited excellent mold release characteristics.
Excellent mold release was observed with no blisters or delaminations.
In addition a suitable lubricant or a mold release agent can be used.
Mold release agent without silicone.
Do not require transfer of mold release materials to the molded product.
Mold release for resins.
This excess thickness permits better mold release of the preparation.
See also
Internal mold release agents for polyurethane materials.
This method may also be used in the mold release procedure.
Apply your mold release compound to the forms.
Preferably the groove has been prepared with a mold release material.
Preferred mold release agents contain zinc stearate.
Other materials can also be used as the mold release layer.
Mold release of accurate shape.
Ten tensile bars are molded preferably without silicone mold release.
As a mold release because materials such as epoxy do not stick to it.
This component will contain the present mold release systems.
A mold release can be used to allow for rotation if required.
The mold was coated with a mold release agent following common practice.
The mold release agent and the catalyst were added.
The composition may also include mold release compounds such as polyethylene.
No mold release composition was sprayed onto the mold surface.
Other materials can be used as the mold release layer in other embodiments.
All mold release agents were obtained from commercial suppliers.
This test evaluates the lubricating power of the mold release agents.
Flow aids and mold release compounds are also contemplated.
Silicon dioxide can also be added to impart better mold release properties.
The mold release ability of each composition was rated as poor or good.
A second issue to consider in choosing a proper mold release agent is abrasion resistance.
Mold release may be employed to help remove the cured layer.
Adhesion during the mold release may cause damage to the replica.
It is then placed in a picture frame mold coated with mold release agent.
Fast curing mold release compositions and methods of preparing same.
The second component of the present internal mold release systems is a polysiloxane compound.
A lecithin mold release agent was used on the dye to assist in release.
Some of the cooling water entered the mold to function as a mold release agent.
Conventional mold release agents known in the prior art are acceptable.
The removed layer may be washed with alcohol to remove any mold release.
The mold release agent is one that is suitable for use on silicone.
The mold was cleaned with ethanol and sprayed with teflon mold release.
Mouldex is a mold release agent specially designed for copper molds fabrication.
A color indicator or dye also can be added to the invented mold release agent.
