Examples of 'mold temperature' in a sentence
Meaning of "mold temperature"
Mold temperature refers to the temperature at which a mold, typically used in manufacturing processes like injection molding, is maintained
How to use "mold temperature" in a sentence
Basic
Advanced
mold temperature
It requires only a relatively low mold temperature.
With mold temperature control system.
This fast cooling leads to a lower mold temperature at the time of casting.
Mold temperature control unit.
Customer A needs to buy a circulator to produce better parts and have a more accurate mold temperature.
Mold temperature is important for more than one reason.
Rotolog software for In Mold temperature measurement.
The mold temperature or cooling for the mold is controlled by circulating fluid.
Specifications of mold temperature controllers ;.
The mold temperature or cooling for the mold is controlled by means of circulating fluid.
If desired, several of these mold temperature sensors can be provided.
The mold temperature was maintained at a temperature which was for all practical purposes constant.
For simplicity, we can ignore any heat loss due to elevated mold temperature.
Closed loop mold temperature control system and method.
Next, The working principle of the mold temperature machine.
See also
The mold temperature may be maintained at a temperature suitable for either hot or cold molding.
Various series of chiller and Mold temperature controller for client 's selecting.
Mold Temperature Controller was originally used in the temperature control industry of injection molds.
In the design of automotive mold temperature control system, there are mainly two combinations,.
The examples of the invention were run at a 66 ° C mold temperature.
A higher mold temperature helps polymers crystallize faster and reduces the cycle time.
The film was rapidly cooled at a cooling mold temperature of 0 °C to give an amorphous film.
The mold temperature may be increased progressively, for example in stages, within the range.
The reacting component temperature and the mold temperature are as reported in Table 1.
Typically, the mold temperature is more stable than by controlling the fluid temperature.
Stretch blow molding conditions Mold temperature ( set temperature ),.
However, when the mold temperature was increased, the impact resistance improved dramatically.
Air cooled chiller, Water cooled chiller, Mold temperature controller.
Adjusting of the metal mold temperature and the preheating temperature thereof can be made readily.
The comparative example was run at a 72°C mold temperature.
On the contrary, the mold temperature should be reduced as much as possible.
When a mold temperature increases, in particular, a problem arises in that press formability is extremely deteriorated.
These plates have been injection molded at a mold temperature of 210°C and a tool surface temperature of 40°C.
The mold temperature is also relevant for the crystallization of the fat-containing confectionery mass.
Generally speaking, as the mold temperature is increased, the time to gelation is decreased.
The mold temperature was 90 degrees C on the cavity side and 50 degrees C on the core side.
However, some variation of the mold temperature depending on time and place is somewhat allowed.
Mold temperature is 93°C and demold time after pressurizing is 2 minutes.
Use the oil transport type mold temperature machine for the working temperature ≥ 150 ℃.
The mold temperature ( water cooled ) is listed in Table I.
Stretch blow molding conditions Mold temperature ( set temperature ), 60 deg . C Stretch blow temperature,.
Water Mold Temperature Controller - manufacturer, factory, supplier from China.
For polypropylene the mold temperature might be within a temperature range of from about 30 to about 100°C.
Oil Mold Temperature Controller - manufacturer, factory, supplier from China.
Home > mold temperature controller.
Water / Oil mold temperature controller, Air cooled low temperature chiller.
Extrusion Mold Temperature Controller - manufacturer, factory, supplier from China.
Injection Mold Temperature Controller - manufacturer, factory, supplier from China.
The mold temperature of the core was set at 80°C.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Mold
Show more
They broke the mold on that one
Mold requires high humidity levels to grow
No one wants a mold of their own penis
