Examples of 'molded plaques' in a sentence
Meaning of "molded plaques"
molded plaques: Shaped or formed decorative items or objects often made from materials like clay, resin, or metal
How to use "molded plaques" in a sentence
Basic
Advanced
molded plaques
Molded plaques were produced and electroplated.
Properties of the compression molded plaques were measured as indicated above.
The molded plaques were then evaluated for paint adhesion.
Properties of the compression molded plaques are measured as indicated above.
Physical properties were measured either on the cast strip or compression molded plaques.
Compression molded plaques were also colorless with no evidence of oil bleed out.
The compression set properties given hereunder are based on compression molded plaques.
The molded plaques were also subjected to Nitrogen elemental analysis.
Intrinsic viscosities of the second pass extrudate and the injection molded plaques are determined.
The compression molded plaques were used for microtensile and Izod impact testing.
The results show that all three susceptors provided heat up of the molded plaques.
The molded plaques were obtained in the same way as example 1.
The dusted pellets were then molded and optical measurements performed on the molded plaques.
All test specimens were cut from the injection molded plaques according to ASTM methods.
Tensile impact strength at room temperature is measured according to ASTM D1822 on compression molded plaques.
See also
Plasticizer exudation, determined by feeling the molded plaques 8 days after their manufacture.
The molded plaques are cut into strips for Limiting Oxygen Index ( LOI ) and FP-7 testing.
Density, ash density and density increase with injection molded plaques.
The blends were then fabricated into compression molded plaques and tested after approximately 7 days.
Samples having a dimension of 7 cm x 3 mm x 1.25 cm are prepared from compression molded plaques.
Well defined notches were produced in compression molded plaques using a special " notched " mold.
Shrinkage Shrinkage was measured according to an internal standard using 150x80x2 mm injection molded plaques.
Analysis was performed on compression molded plaques placed into a 60°C nitrogen oven.
A - The coating was applied at about 1 mil ( 25 µm ) dry film thickness onto injection molded plaques.
Cone calorimetry testing of the compression molded plaques is carried out according to ASTM E 1354.
Figure 3 shows SEM Morphology of compression molded plaques at core.
The compression molded plaques were cooled as detailed in the ASTM F-1473 procedure.
Abrasion Resistance Abrasion resistance is measured on compression molded plaques according to ISO 4649.
Hexane extractables using compression molded plaques were determined according to ASTM D5227.
Small samples ( 5mg ) were drilled out of molded plaques.
Abrasion resistance is measured on compression molded plaques according to ISO 4649.
You'll also be interested in:
Examples of using Plaques
Show more
Diagnosed pleural plaques normally precede asbestosis
Plaques in lobbies of these three municipal buildings
So this formation of these plaques we call atherosclerosis
Examples of using Molded
Show more
They all have a molded shape of a cloverleaf
Molded hand screw to tighten connector bushing
The beauty we molded from sheer misery
