Examples of 'mono mode' in a sentence
Meaning of "mono mode"
This phrase refers to a setting or state in which a device or system operates or produces sound output using only a single channel or input, commonly found in audio equipment
How to use "mono mode" in a sentence
Basic
Advanced
mono mode
Your radio will switch to mono mode.
Select mono mode or stereo mode.
This switch switches the master output to mono mode.
Stereo or mono mode to choose from.
This function is effective only on dual mono mode sound.
Lights when the mono mode is set using the.
In mono mode this value is sent directly to the coder.
Could not open device for playback in mono mode.
Use mono mode for stations with weak reception.
Could not open device for recording in mono mode.
In mono mode you only have to connect the left input to drive both outputs.
Each earbud can also be used on its own in mono mode.
Switch to Mono mode and listen in mono.
There is a global setting to put the instrument into mono mode instead of stereo.
Bridge Mono mode makes it possible to drive thousands of watts into a single speaker.
See also
You can pack the master speaker for travel and use it in mono mode.
Please refer to the above section on Bridge Mono mode for proper setup confi guration.
You can set the FM station receiving mode to the stereo mode or mono mode.
Ensure that Bridge Mono mode is switched on switch in the IN position.
This LED lights up when the unit is in mono mode.
Please refer to the Bridge Mono mode section for proper setup confi guration.
Lights up when Auto mode is selected and disappears when Mono mode is selected.
Ensure that Bridge Mono mode is switched OFF switch in the OUT position.
The associated LED is lit in mono mode.
The output operates in mono mode only L+R summed in case of active stereo input.
Speakon output Bridged mono mode only.
When Mono mode is selected, a single voice is assigned per MIDI Channel.
MONO FM receiving mode is set to the mono mode.
Select required loudness setting and stereo / mono mode for obtaining a best sounding quality.
Key and associated indicator to switch Control Room in mono mode.
The loading of the speaker in Bridge Mono mode should be 4 ohms or above.
The red LED above Mode switch indicates mono mode.
The Bridge Mono mode section on page 8 describes the special speaker connection used.
Connecting power amplifiers to preamplifier in mono mode Balanced Mono.
Bridge Mono Mode Indicator LED, to indicate that the amplifier works in Bridge mode.
Pressing this button alternates between Stereo mode and Mono mode.
The Bridge Mono mode section on pages 12 and 13 describes the special speaker connection used.
The yellow BRIDGE LED indicates the amp is in bridged mono mode.
When two-signal transmission is not required, use Mono Mode for improved signal-to-noise performance.
The yellow BRIDGE LED illuminates when the amp is in bridged mono mode.
Select Color / Mono scan, Mono mode icon will be displayed on status LCD.
Select the stereo bridged mode for using the channels A and B in the mono mode.
Volt line output connection, bridge mono mode 200 volt line output connection, bridge mono mode.
Change the stereo / mono setting to mono mode.
When the received stereo signal is weak, switch to mono mode to improve the signal.
With two parallely connected 4 Ohms loudspeakers in the bridged mono mode.
An LED indicates the selection . [ 18 ] MONO LED indicating mono mode operation.
By choosing only the left inputs and outputs, you will keep the vocoder in Mono mode.
Without a connection to the Right jack, the Left jack will go into Mono mode.
Button STEREO / MONO with LEDs For switching over between stereo and mono mode.
You'll also be interested in:
Examples of using Mono
Show more
Set up a mono record track in your software
The remote control input requires a mono
In mono reception the depth of sound is improved
Examples of using Mode
Show more
Automatic mode should be selected in normal cases
We have even developed a secret mode of communication
Void mode transaction counter and total
