Examples of 'mono signal' in a sentence
Meaning of "mono signal"
mono signal: This phrase refers to a monaural or monophonic audio signal. It indicates that the audio is in a single channel format, where sound is reproduced through a single speaker or audio output. Mono signals are commonly used in older audio systems or in certain professional audio applications
How to use "mono signal" in a sentence
Basic
Advanced
mono signal
The mono signal is encoded as described above.
Bridged amplifiers for a common mono signal.
A summed up mono signal for the subwoofer is provided here.
Mono amplifiers for six different mono signal.
Another mono signal source with line level output.
Both outputs are identically provided with the input mono signal.
Mono signal in the stereo sound of the master signal.
This can be necessary if there is only one mono signal available.
In case of mono signal the control operates like a panorama control.
With a stereo headphone the same mono signal will be heard in each ear.
The mono signal is delayed and thereafter played on a centre speaker.
You may run a stereo or a mono signal into the inputs of the amplifier.
The mono signal from the FlashMic will be heard in both earpieces.
The signals of the left channel and the right channel are mixed to a mono signal.
For mono signal.
See also
The amplifier adds both stereo channels together converting them into a mono signal.
This will create a mono signal when a stereo signal source is connected.
An error in one channel signal may therefore not necessarily affect the mono signal.
Mono signal sources should be connected to the left jack input connector.
In general these compose a mono signal as a linear combination of the input signals.
Mono signal input or right stereo signal input jack Sensitivity.
Surround effects can enrich the stereo field of a mono signal by creating spatial effects.
Then the mono signal can be picked up at both jacks of the respective output.
A One or more subwoofers with output combined into a single mono signal.
The mono signal is then internally switched to the right and left channels.
OR they can carry a mono signal that is balanced.
Mono amplifiers for 4 different mono signal.
This method uses a mono signal and given stereo recordings of the same signal.
The operation of the transmitter will be described for a mono signal divided into M subband signals.
A single mono signal should be connected to the I jack.
Inputs for connection of up to three mono signal sources LINE IN.
Therefore, a mono signal is created when connecting a stereo signal source.
What happens if you drive a mono signal into this effect?
If there is a signal on both inputs, then they are merged into a mono signal.
In this instance, the mono signal may represent the stereo signal.
In this case, a decoding of the primary bitstream results in a full band mono signal.
When connecting a stereo signal source, a mono signal is internally created.
Said mono signal and said width-parameter are fed into said primary bitstream.
In this case, the downmix signal can be a mono signal or a stereo signal.
In this case, the mono signal can be taken off at both phono jacks.
The outputted down-mixed signal may be a mono signal or a stereo signal.
Based on these spatial cues, the stereo input signal is adaptively combined into a mono signal.
As a result, the synthesized mono signal will be similar to the active channel.
For mono tracks, selecting both of the 2 inputs provides the crucial mono signal.
Assume that in the decoder, the mono signal component consists of a single sinusoid.
One mono signal driving both channels, with independent attenuation control for each speaker system.
Mono channel, Panorama control PAN to place the mono signal in the stereo sound.
One mono signal driving both channels, with independent gain control for each speaker system.
MONO, the input signals of the two channels are mixed and sent as a mono signal.
The two stereo channels, a mono signal will be created internally for the subwoofer.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Mono
Show more
Set up a mono record track in your software
The remote control input requires a mono
In mono reception the depth of sound is improved
