Examples of 'motor nameplate' in a sentence
Meaning of "motor nameplate"
motor nameplate - This refers to a metal plate or tag attached to a motor, typically containing important information such as the motor's specifications, serial number, and other relevant details
How to use "motor nameplate" in a sentence
Basic
Advanced
motor nameplate
Refer to motor nameplate for wiring procedures.
Wire motor according to diagram on motor nameplate.
By the service factor on motor nameplate under any pumping condition.
Enter motor rated speed in rpm from motor nameplate.
Check the motor nameplate for the ambient temperature rating and the insulation class ratings.
Enter motor power factor from motor nameplate.
When the motor nameplate says “ Marathon, ” you know you have a “ Motor for the Long Run “.
Do not deviate from the motor nameplate wiring.
The motor starting current is equal to the highest value stated on the motor nameplate.
The supply voltage must be the same as the motor nameplate voltage plus or minus 10.
The supply voltage, rated maximum current and power factor ( PF ) appear from the motor nameplate.
The wiring must be the same as the motor nameplate voltage plus or minus 10.
Check voltage at the fan to see if it corresponds to the motor nameplate.
The wiring used must be rated for the motor nameplate voltage, plus or minus 10.
Note the relevant motor connection diagram and the details on the motor nameplate.
See also
Power supply frequency and voltage must match motor nameplate frequency and voltage to within ± 10.
Set the motor data to exactly the same value as on the motor nameplate.
These values are needed to program motor nameplate data later.
Do not operate unit in range where amp draw exceeds motor nameplate.
Follow motor manufacturer 's wiring diagram on the motor nameplate or terminal cover carefully.
Set motor data so that they comply with the data on the motor nameplate.
It corresponds with the motor nameplate.
Enter motor rated voltage in volts from motor nameplate.
Some appliances and tools will list on the motor nameplate the starting.
Enter motor rated current in amps from motor nameplate.
Before you start, ensure that you have the motor nameplate data on hand.
Check that the default value fulfils the requirement from the motor nameplate.
Programme all frequency / current limit points from the motor nameplate or motor data sheet.
The values of the various elements depend on empirical motor data and motor nameplate data.
Voltage of motor must be within 10 % of motor nameplate voltage.
Sets the motor nominal speed, as reported in the motor nameplate.
In the NEC, the table is used rather than the motor nameplate.
See “ Electrical ” section of this manual and motor nameplate.
Use the 4 current points [ A ] from the motor nameplate.
You'll also be interested in:
Examples of using Motor
Show more
Motor eye sensors attached to motion detectors
Use of gaseous fuels in motor vehicles continuing
Motor worked to hard drawing extra current
Examples of using Nameplate
Show more
The nameplate is located on the bottom exterior
Remove cover on handle nameplate by lifting end
The nameplate must always be clearly legible
