Examples of 'motor shaft' in a sentence
Meaning of "motor shaft"
Motor shaft refers to the rotating component in a motor or engine that transmits power to other parts or devices
How to use "motor shaft" in a sentence
Basic
Advanced
motor shaft
Carefully place blade onto motor shaft.
Sleeve bearings on motor shaft never need lubrication.
Also lightly grease the motor shaft.
Check motor shaft bearing play.
The impeller is connected to the motor shaft.
Wash the motor shaft with a small brush.
Defective ball bearings on crankshaft or motor shaft.
Check motor shaft for binding.
Carefully remove blade from motor shaft.
Place on motor shaft flats to hold shaft stationary.
Carefully remove disc from motor shaft.
Motor shaft is locked by bad bearing.
Also check for bent motor shaft.
Steel motor shaft with thermal protector inside.
The pins of the turntable motor shaft.
See also
Motor shaft of the thrust reverser.
Do not forget to clean the motor shaft.
Place on motor shaft with desired cutting edge facing up.
It matches the shape of the motor shaft.
The motor shaft or trimmer head is bound with grass.
Press cam down in place on motor shaft.
Ball bearings on the motor shaft never need lubrication.
Be careful not to damage the motor shaft.
Place spring over motor shaft so it rests on rotating half.
Slip fan blade off motor shaft.
Allow the motor shaft to engage into the coupling.
Check the rotation of the motor shaft.
Firmly grasp the motor shaft and hold it steady.
Place rear grille on the motor shaft.
Then rotate the motor shaft to distribute the grease.
Never store any blade or disc on motor shaft.
The blade and the motor shaft must not be.
Secure the propeller adapter to the motor shaft.
Female coupling step motor shaft mounting hole.
This will be almost parallel to the motor shaft.
The motor shaft is in the form of a blind hole hollow shaft.
Flattened section on the motor shaft.
Risk of motor shaft damage if the hub is not sufficiently heated.
Reinstall fan blade to motor shaft.
The motor shaft and mower blade should not be aligned.
Belt not installed on motor shaft.
Turn the motor shaft half a revolution towards the right.
Position the belt around the motor shaft.
An electric motor shaft goes into a gearbox to reduce its rotational speed.
Acceptable forces applied to motor shaft.
Remove fan from motor shaft before removing motor from heater.
Blades attached to the motor shaft.
Center the motor shaft in the opening at the front of the cowling.
Tighten snugly by holding motor shaft with wrench.
The coupling may be by means of a screw thread on the motor shaft.
You'll also be interested in:
Examples of using Motor
Show more
Motor eye sensors attached to motion detectors
Use of gaseous fuels in motor vehicles continuing
Motor worked to hard drawing extra current
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
