Examples of 'mould surface' in a sentence
Meaning of "mould surface"
The term 'mould surface' typically refers to the outer or visible layer of a mould. In the context of manufacturing or casting, it is the part of the mould that comes into direct contact with the material being moulded, such as liquid metal or molten plastic. The quality and smoothness of the mould surface can greatly impact the final product
How to use "mould surface" in a sentence
Basic
Advanced
mould surface
A standard release agent was applied to the mould surface.
The coatings enhance mould surface properties for improvements in product quality.
The mark also appears on the anterior mould surface.
The texture is applied to the mould surface by acid etching using a resist.
The insert could be positioned onto the mould surface.
The mould surface or surfaces can in certain embodiments exhibit open pores.
The surface finish of the casting is as good as the mould surface.
A ring shaped pattern is then printed onto a mould surface using a pad transfer printing method.
A thermoplastic material can also be sprayed onto the mould surface.
The mould surface 2 was formed by a galvanoplate having a leather grain.
The release agents must not damage the mould surface.
Applying as a thin coat on the mould surface a thixotropic surface composition comprising,.
More than one opening can be present in the lower mould surface.
Rotating the mould surface and / or by providing a relief onto the mould surface.
Hot cracking is reticular cracking on the mould surface caused by thermal fatigue.
See also
Once again application may be by brushing or spraying onto the mould surface.
This coating flows slowly over the entire mould surface ensuring a smooth coating.
Ejector pins are used to separate the chocolate shell from one mould surface.
After substantially mould filling, the mould surface is restored to its original position.
More than one groove can be present in the lower mould surface.
The mould surface can for example be made ( at least partially ) of a silicone material.
At this stage total conformation of the film to the mould surface is achieved.
This last portion of the mould surface is preferably on a non-visible side of the gasket.
This arrangement will lead to separation of the upper mould surface first.
The entire mould surface was therefore covered with a continuous surfacing layer, in segmented form.
This allows the workpiece to be peeled away from a mould surface of the tool.
O A study of the effects of mould surface conditions on crack for ation in semi-continuous casting.
This results in the solidification of the resin into a layer on the mould surface.
Placing the panel and the first mould surface against one another ;.
The method may comprise peeling the workpiece away from the mould surface.
Preferably the sheet-form material is applied to a mould surface comprising aluminium or aluminium alloy.
In the method according to the invention the skin layer is moulded against a mould surface.
The mould surface 6 is flush with the lower surface of the glass panel 3.
This enables the resin to completely wet out the mould surface during processing.
The mould surface 6 is flush with the first major surface 3 of the glass panel 2.
A solution of the amides is usually sprayed into the mould surface between moulding operations.
The present invention relates to a method of making an elastomeric skin 1 against a mould surface.
A method according to any preceding claim wherein one mould surface is at a temperature below 0°C.
In a second step a reticulated polyurethane foam sheet was laid onto the lower mould surface.
The mould part 4 has a mould surface 3, without any surfaced, coated or otherwise applied layer.
A release medium and subsequently a gelcoat may be applied to the mould surface prior to step a.
Both halves of the mould surface were held at 50°C for the filling operation.
All parts released from the mould easily without evidence of sticking to the mould surface.
Example 1 A mould was provided having a mould surface as shown in Figure 1.
The first step of the process involves applying the colourant over the mould surface.
Sealing the vacuum film to the mould surface with a sealing element ( 16 ).
Distance from the Distance from the ingot surface mould surface.
In this instance, the mould surface can show roughness less than or equal to 0.5 µm.
The described system uses a pair of pressure chambers respectively providing a mould surface and a backing surface.
The upper mould surface 9 is formed by a third conveyor 15 arranged above the second conveyor 14.
You'll also be interested in:
Examples of using Mould
Show more
Then the mould should be removed gently
Mix all ingredients in the baking mould
You will mould yourself in our ways
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
