Examples of 'mounting hole' in a sentence
Meaning of "mounting hole"
mounting hole: A hole in a physical object that is used to attach or secure something, typically for installation or assembly purposes
How to use "mounting hole" in a sentence
Basic
Advanced
mounting hole
Mounting hole for anti theft cable.
Insert a bolt into each mounting hole.
Mounting hole position below the unit.
Repeat process for other mounting hole.
The mounting hole locations are not correct.
Remote control sensor box mounting hole.
Mounting hole positions are indicated by the arrows.
It also has an exemplary single mounting hole.
Mounting hole in the machine base as shown.
Male coupling brake screw mounting hole.
A cylindrical mounting hole is provided in the crank.
Stroke sensor retainer pin mounting hole.
Make the mounting hole as follows.
A template is included to aid in marking the mounting hole.
Locate the mounting hole in each side trim.
See also
Mark the location for the mounting hole.
Mounting hole locations viewed from front of heater.
Feed tubes down through mounting hole in sink.
Mounting hole on the side handle.
Waffle plate foot mounting hole.
Woofer mounting hole to woofer terminals.
The position light mounting hole.
Mounting hole compatible with most common standard tripods.
Female coupling step motor shaft mounting hole.
Use the opposite mounting hole for screwdriver access.
Mounting hole in lower handle for a permanent mounting option.
Bracket retainer pin mounting hole.
Align mounting hole in bottom vent to holes in the oven.
Insert a supplied wall plug into each mounting hole.
Align mounting hole in bottom oven trim to holes in the.
Insert and position the unit in the mounting hole.
Faucet for one mounting hole and ceramic packages.
Place the work clamp in the desired mounting hole.
Depth gauge into the mounting hole on the side handle.
Knobs on both sides to fasten the unit and a mounting hole to.
Fasten the unit and a mounting hole to fix a mounting hook.
Place the air conditioner over the prepared mounting hole.
The size of mounting hole should be adjusted properly to eliminate clearance.
Locate the amplifi er and mark the mounting hole locations.
One mounting hole is round and the other mounting hole is square.
These are designed to fix a mounting hole that has been ovaled out.
Lay down the engine facing the valve mounting hole.
You will be able to see a mounting hole through the correct slot.
The switching control unit is connected to the first mounting hole.
Sides to fasten the unit and a mounting hole to fix a mounting hook.
The lifting drive plunger is inserted into the mounting hole.
The mounting hole of the diamond cup wheel may not be increased.
Position the yoke so that the mounting hole is at the top.
Use the mounting hole diagram to measure and cut a mounting hole.
The transmitter can be wall mounted mounting hole at the back.
You'll also be interested in:
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
Examples of using Mounting
Show more
Wall mounting the rear speaker system
Sdars radio antenna mounting holes template
Includes mounting hardware and installation instructions
