Examples of 'move choke' in a sentence
Meaning of "move choke"
The phrase 'move choke' is likely a typographical error or incomplete phrase. Without further context, it is unclear what specific meaning or usage this phrase may have
How to use "move choke" in a sentence
Basic
Advanced
move choke
Move choke lever to run position.
After the engine warms up enough to run smoothly move choke rod to OFF position.
Slowly move choke lever to no choke.
If engine fires but does not start, move choke control.
Move choke lever to closed position.
Once engine has started, slowly move choke lever to no choke.
Move choke lever to full choke.
If engine fires but does not start, move choke control to half choke position.
Move choke to halfway position until engine runs smoothly.
As engine warms up, and RPM stabilizes, gradually move choke control to OFF position.
Move choke to START position to start a cold engine.
After engine starts running, move choke lever to HALF CHOKE position until unit runs smoothly.
Move choke lever to OPEN position when engine starts.
When engine starts, move choke knob to.
Move choke lever to OPEN position unless the engine is warm.
See also
When engine starts, move choke lever to.
Move choke lever to RUN position and squeeze throttle to desired speed.
If engine is cold, move choke lever to close position b1.
Move choke lever to RUN position before opening air filter cover.
When engine starts, gradually move choke lever to “ no choke ” position and increase throttle speed.
Move Choke Lever to the right once engine is started or for warm engine starting.
To stop the engine at any time, move choke lever to “ OFF ” position.
Move choke control lever to CHOKE position.
When engine starts, slowly move choke lever to the “ Run ” position.
Move choke lever to START position.
Choked improperly, flooded engine Move choke control to " RUN " position or place throttle.
Move choke to the CHOKE po si tion.
When engine starts, slowly move choke control to " RUN " position as engine warms up.
Move choke control to RUN position.
Pull on engine crank until engine starts, move choke lever to " RUN " position.
Move choke to the OFF position.
As engine starts to falter, move choke control lever ( B ) right to OPEN position.
Move Choke Lever to the left for cold engine starting.
Once engine starts move choke lever ( N ) to the OPEN position.
Move choke control to CHOKE or START position.
Once engine starts, move choke lever to ‘ RUN ' position.
Move choke lever to half choke position C.
As engine warms up, slowly move choke lever to RUN ( ) position.
Move choke lever to half choke position D.
Stopping ( see fig . ¤ ) Do not move choke control to CHOKE to stop engine.
Move choke lever to choke position B.
Choke, After engine fires ( or 5 pulls ), move choke lever back to Run position.
Move choke lever to the FULL CHOKE posi.
When starting engine, move stop switch to " START " position, If engine is cold, move choke.
DO NOT move choke control to CHOKE position to stop engine.
Move choke lever to half choke position, and pull.
If engine is warm, move choke lever right as soon as engine starts.
Move choke lever to half choke position, and pull recoil handle twice.
If engine does not start, move choke lever to choke and repeat normal starting procedure.
Move choke to ½ position and pull the cord until the engine starts and runs.
