Examples of 'move the blade' in a sentence
Meaning of "move the blade"
Move the blade: This phrase is often used in the context of cutting or slicing something, instructing to physically relocate or adjust the sharp edge of a tool or weapon
How to use "move the blade" in a sentence
Basic
Advanced
move the blade
Move the blade support bearing shaft.
The simplest parries move the blade in a straight line.
Move the blade into the workpiece.
Just loosen them enough to be able to move the blade.
Inside to move the blade to the normal position.
The mount determines the ease with which you will move the blade.
When you move the blade rotation control.
Place the base assembly against the work, then move the blade into the work.
Do not move the blade suddenly.
Turn the rear knob ( 5 ) to move the blade guide.
Slowly move the blade upward to the highest position.
Turning the screw counterclockwise will move the blade down away from the rollers.
Move the blade slowly backwards and forwards and try to.
Turning the screw clockwise will move the blade toward the blade guide rollers.
Move the blade through the food and use a stabbing action.
See also
However, it is also possible to move the blade through the article to be cut.
Move the blade through the food and use a slow up and down action.
Then, apply the cream and gently move the blade across the area.
Slowly move the blade upward to the highest position and release the safety lock.
Turning the screw counter-clockwise will move the blade away from the blade guide rollers.
Move the blade along the contouring line without pressing the skin to avoid cuts.
Loosen the bevel lock lever ( J ), turn and move the blade height / bevel adjustment wheel I.
Move the blade rotation control to the ENGAGE position.
The actuator 71 is configured to move the blade 10 in a cutting operation.
Move the blade rotation control to the DISENGAGE position.
Remember to move the blade slowly towards your body.
Move the blade rotation control to the DIS.
Push the button and move the blade clutch control lever forward to engage the blade.
Move the blade clamp lever ( 2 ) down to lock the blade clamping mechanism.
If necessary, move the blade drive spring ( 2 ) to the bottom hole.
Move the blade rotation control ( 1 ) to the ENGAGE position to rotate the blades.
Figure 8 Move the blade rotation control to the ENGAGE position 2.
Move the blade rotation control ( 1 ) to the DISENGAGE position to stop the blades.
Figure 8 Move the blade rotation control to the DISENGAGE position 1.
Move the blade tension lever ( Figure 6 ) to the left to increase tension on the blade.
To move the blade to the half open position, press the half-opening switch.
Move the blade clamp lever ( 2 ) up to release the.
Move the blade drive spring ( 2 ) to the middle hole.
Move the blade guide assemblies ( B, Fig 5 ) away from the wheel.
