Examples of 'mower housing' in a sentence
Meaning of "mower housing"
Mower housing refers to the part of a lawnmower that encloses and protects the engine, blades, and other internal components. It is typically made of sturdy materials like metal or plastic to withstand the rigors of outdoor use. The design of the mower housing directly affects the cutting performance and safety of the lawnmower
How to use "mower housing" in a sentence
Basic
Advanced
mower housing
Make sure the mower housing is level.
Push down on each side of the mower housing.
Rear of mower housing or blade dragging in grass.
Adjust the level of the mower housing.
Rear of mower housing and blade dragging in heavy grass.
Clean the underside of the mower housing.
Rear of lawn mower housing or cutting blade dragging in grass.
Check the level of the mower housing.
Push the mower housing under the right side of the unit.
Cleanthe bottom of the mower housing.
Raise or lower rear of mower housing by adjusting right rear lift link.
Clean the top and bottom of the mower housing.
Make sure both sides of the mower housing are setting on a flat surface.
The grass catcher is secured to the lawn mower housing when.
Pull the mower housing away from the right side of the unit.
See also
Spray the underside of the mower housing with water.
The rear of the mower housing and the blade are dragging in thick grass.
Place discharge guard on top of discharge opening of lawn mower housing.
Use the left side of the mower housing to trim near an object.
Opposite ends of the lower links are pivotally mounted to the mower housing.
Never reach under the mower housing with your hands or your feet.
There are lower links on each of the opposite sides of the mower housing.
The mounting linkage is connected to the mower housing about a single horizontal pivot axis.
Make sure that the cable is always a safe distance from the mower housing.
Underside of mower housing will collect cut grass and dirt more rapidly on moist days.
This provides the automatic power shut off when the mower housing is raised.
Also, a clean mower housing will help prevent a fire.
DO NOT use tire chains when the mower housing is.
Keep the underside of the mower housing clean and remove grass build-up.
For a lawn to look better, check the cutting level of the mower housing.
Place a wooden block between the blade and mower housing to stop the blade from moving.
Important, Position the curved ends of the blade to point toward the mower housing.
After you mow, clean the mower housing as follows.
Wet - Mower housing is blocked - Mowing blades are blunt or worn.
For best cutting results, mower housing should be properly leveled.
Until they click into the toothed recess on the mower housing B1.
PROBLEM, The mower housing does not cut level.
It is, however, necessary to remove the mower housing insert.
Rear of lawn mower housing or cutting 1.
Place your foot on the non-slip step on the mower housing 2.
For best performance, keep mower housing free of built-up grass and trash.
Fold the collision guard ( 9 ) back onto the mower housing.
For best performance, keep the mower housing free of built-up grass.
Raise rear of lawn mower housing one ( 1 ) blade dragging in heavy grass . setting higher.
If the air pressure is incorrect, the mower housing will not cut level.
Raise rear of mower housing one ( 1 ) setting higher.
Also, the wrong air pressure will keep the mower housing from cutting level.
To lower front of mower housing turn nuts “ G ” and “ H ” clockwise.
After each use, clean the bottom and top of the mower housing for better performance.
For best performance, keep mower housing free of built-grass and trash.
You'll also be interested in:
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
Examples of using Mower
Show more
Raise mower to highest position to allow access to
Never push the mower up the slope
The mower was fully assembled at the factory
